Table of Contents
gluNurbsCallback - define a callback for a NURBS object
void
gluNurbsCallback( GLUnurbs* nurb,
GLenum which,
_GLUfuncptr CallBackFunc )
eqn not supported
- nurb
- Specifies the NURBS object (created with
gluNewNurbsRenderer).
- which
- Specifies the callback being defined. Valid
values are GLU_NURBS_BEGIN, GLU_NURBS_VERTEX, GLU_NURBS_NORMAL, GLU_NURBS_COLOR,
GLU_NURBS_TEXTURE_COORD, GLU_NURBS_END, GLU_NURBS_BEGIN_DATA, GLU_NURBS_VERTEX_DATA,
GLU_NURBS_NORMAL_DATA, GLU_NURBS_COLOR_DATA, GLU_NURBS_TEXTURE_COORD_DATA,
GLU_NURBS_END_DATA, and GLU_NURBS_ERROR.
- CallBackFunc
- Specifies the function
that the callback calls.
gluNurbsCallback is used to define a
callback to be used by a NURBS object. If the specified callback is already
defined, then it is replaced. If CallBackFunc is NULL, then this callback
will not get invoked and the related data, if any, will be lost.
Except
the error callback, these callbacks are used by NURBS tessellator (when
GLU_NURBS_MODE is set to be GLU_NURBS_TESSELLATOR) to return back the OpenGL
polygon primitives resulting from the tessellation. Note that there are
two versions of each callback: one with a user data pointer and one without.
If both versions for a particular callback are specified then the callback
with the user data pointer will be used. Note that ``userData'' is a copy of
the pointer that was specified at the last call to gluNurbsCallbackData.
The error callback function is effective no matter which value that GLU_NURBS_MODE
is set to. All other callback functions are effective only when GLU_NURBS_MODE
is set to GLU_NURBS_TESSELLATOR.
The legal callbacks are as follows:
- GLU_NURBS_BEGIN
- The begin callback indicates the start of a primitive. The function takes
a single argument of type GLenum, which can be one of GL_LINES, GL_LINE_STRIP,
GL_TRIANGLE_FAN, GL_TRIANGLE_STRIP, GL_TRIANGLES, or GL_QUAD_STRIP. The
default begin callback function is NULL. The function prototype for this
callback looks like:
void begin ( GLenum type );
- GLU_NURBS_BEGIN_DATA
- The same as the GLU_NURBS_BEGIN callback except that it takes an additional
pointer argument. This pointer is a copy of the pointer that was specified
at the last call to gluNurbsCallbackData. The default callback function
is NULL. The function prototype for this callback function looks like:
void beginData (GLenum type, void *userData);
- GLU_NURBS_VERTEX
- The vertex
callback indicates a vertex of the primitive. The coordinates of the vertex
are stored in the parameter ``vertex''. All the generated vertices have dimension
3, that is, homogeneous coordinates have been transformed into affine coordinates.
The default vertex callback function is NULL. The function prototype for
this callback function looks like:
void vertex ( GLfloat *vertex );
- GLU_NURBS_VERTEX_DATA
- This is the same as the GLU_NURBS_VERTEX callback, except that it takes
an additional pointer argument. This pointer is a copy of the pointer that
was specified at the last call to gluNurbsCallbackData. The default callback
function is NULL. The function prototype for this callback function looks
like:
void vertexData ( GLfloat *vertex, void *userData );
- GLU_NURBS_NORMAL
- The normal callback is invoked as the vertex normal is generated. The components
of the normal are stored in the parameter ``normal''. In the case of a NURBS
curve, the callback function is effective only when the user provides
a normal map (GL_MAP1_NORMAL). In the case of a NURBS surface, if a normal
map (GL_MAP2_NORMAL) is provided, then the generated normal is computed
from the normal map. If a normal map is not provided then a surface normal
is computed in a manner similar to that described for evaluators when GL_AUTO_NORMAL
is enabled. The default normal callback function is NULL. The function
prototype for this callback function looks like:
void normal ( GLfloat
*normal );
- GLU_NURBS_NORMAL_DATA
- The same as the GLU_NURBS_NORMAL callback
except that it takes an additional pointer argument. This pointer is a copy
of the pointer that was specified at the last call to gluNurbsCallbackData.
The default callback function is NULL. The function prototype for this
callback function looks like:
void normalData ( GLfloat *normal, void
*userData );
- GLU_NURBS_COLOR
- The color callback is invoked as the color
of a vertex is generated. The components of the color are stored in the
parameter ``color''. This callback is effective only when the user provides
a color map (GL_MAP1_COLOR_4 or GL_MAP2_COLOR_4). ``color'' contains four components:
R,G,B,A. The default color callback function is NULL. The prototype for this
callback function looks like:
void color ( GLfloat *color );
- GLU_NURBS_COLOR_DATA
- The same as the GLU_NURBS_COLOR callback except that it takes an additional
pointer argument. This pointer is a copy of the pointer that was specified
at the last call to gluNurbsCallbackData. The default callback function
is NULL. The function prototype for this callback function looks like:
void colorData ( GLfloat *color, void *userData );
- GLU_NURBS_TEXTURE_COORD
- The texture callback is invoked as the texture coordinates of a vertex
are generated. These coordinates are stored in the parameter ``texCoord''. The
number of texture coordinates can be 1, 2, 3, or 4 depending on which type
of texture map is specified (GL_MAP1_TEXTURE_COORD_1, GL_MAP1_TEXTURE_COORD_2,
GL_MAP1_TEXTURE_COORD_3, GL_MAP1_TEXTURE_COORD_4, GL_MAP2_TEXTURE_COORD_1,
GL_MAP2_TEXTURE_COORD_2, GL_MAP2_TEXTURE_COORD_3, GL_MAP2_TEXTURE_COORD_4).
If no texture map is specified, this callback function will not be called.
The default texture callback function is NULL. The function prototype for
this callback function looks like:
void texCoord ( GLfloat *texCoord );
- GLU_NURBS_TEXTURE_COORD_DATA
- This is the same as the GLU_NURBS_TEXTURE_COORD
callback, except that it takes an additional pointer argument. This pointer
is a copy of the pointer that was specified at the last call to gluNurbsCallbackData.
The default callback function is NULL. The function prototype for this
callback function looks like:
void texCoordData (GLfloat *texCoord, void
*userData);
- GLU_NURBS_END
- The end callback is invoked at the end of a
primitive. The default end callback function is NULL. The function prototype
for this callback function looks like:
void end ( void );
- GLU_NURBS_END_DATA
- This is the same as the GLU_NURBS_END callback, except that it takes an
additional pointer argument. This pointer is a copy of the pointer that
was specified at the last call to gluNurbsCallbackData. The default callback
function is NULL. The function prototype for this callback function looks
like:
void endData ( void *userData );
- GLU_NURBS_ERROR
- The error function
is called when an error is encountered. Its single argument is of type GLenum,
and it indicates the specific error that occurred. There are 37 errors unique
to NURBS named GLU_NURBS_ERROR1 through GLU_NURBS_ERROR37. Character strings
describing these errors can be retrieved with gluErrorString.
gluNurbsCallback
is available only if the GLU version is 1.2 or greater.
GLU version 1.2 supports
only the GLU_ERROR parameter for which. The GLU_ERROR value is deprecated
in GLU version 1.3 in favor of GLU_NURBS_ERROR. All other accepted values
for CallBackFunc are available only if the GLU version is 1.3 or greater.
gluErrorString, gluNewNurbsRenderer, gluNurbsCallbackData, gluNurbsProperty
Table of Contents