X Input Device Extension Library X Consortium Standard X Version 11, Release 6.4 Mark Patrick Ardent Computer George Sachs Hewlett-Packard Copyright (C) 1989, 1990, 1991 by Hewlett-Packard Company, Ardent Computer. Permission to use, copy, modify, and distribute this docu- mentation for any purpose and without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies. Ardent, and Hewlett-Packard make no representations about the suitability for any pur- pose of the information in this document. It is provided ``as is'' without express or implied warranty. Copyright (c) 1989, 1990, 1991, 1992 X Consortium Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documenta- tion files (the ``Software''), to deal in the Software with- out restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the fol- lowing conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PUR- POSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE X CONSOR- TIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of the X Con- sortium shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization from the X Consortium. X Window System is a trademark of X Consortium, Inc. 1. Input Extension Overview This document describes an extension to the X11 server. The purpose of this extension is to support the use of addi- tional input devices beyond the pointer and keyboard devices defined by the core X protocol. This first section gives an overview of the input extension. The following sections correspond to chapters 9, 10, and 11, ``Window and Session Manager Functions'', ``Events'', and ``Event Handling Func- tions'' of the ``Xlib - C Language Interface'' manual and describe how to use the input device extension. 1.1. Design Approach The design approach of the extension is to define functions and events analogous to the core functions and events. This allows extension input devices and events to be individually distinguishable from each other and from the core input devices and events. These functions and events make use of a device identifier and support the reporting of n-dimen- sional motion data as well as other data that is not cur- rently reportable via the core input events. 1.2. Core Input Devices The X server core protocol supports two input devices: a pointer and a keyboard. The pointer device has two major functions. First, it may be used to generate motion infor- mation that client programs can detect. Second, it may also be used to indicate the current location and focus of the X keyboard. To accomplish this, the server echoes a cursor at the current position of the X pointer. Unless the X key- board has been explicitly focused, this cursor also shows the current location and focus of the X keyboard. The X keyboard is used to generate input that client pro- grams can detect. The X keyboard and X pointer are referred to in this docu- ment as the core devices, and the input events they generate (KeyPress, KeyRelease, ButtonPress, ButtonRelease, and MotionNotify) are known as the core input events. All other input devices are referred to as extension input devices, and the input events they generate are referred to as exten- sion input events. Note This input extension does not change the behavior or functionality of the core input devices, core events, or core protocol requests, with the excep- tion of the core grab requests. These requests may affect the synchronization of events from extension devices. See the explanation in the 1 X Input Extension Library X11, Release 6.4 section titled ``Event Synchronization and Core Grabs.'' Selection of the physical devices to be initially used by the server as the core devices is left implementation depen- dent. Functions are defined that allow client programs to change which physical devices are used as the core devices. 1.3. Extension Input Devices The input extension controls access to input devices other than the X keyboard and X pointer. It allows client pro- grams to select input from these devices independently from each other and independently from the core devices. Input events from these devices are of extension types (DeviceKey- Press, DeviceKeyRelease, DeviceButtonPress, DeviceButtonRe- lease, DeviceMotionNotify, and so on) and contain a device identifier so that events of the same type coming from dif- ferent input devices can be distinguished. Extension input events are not limited in size by the size of the server 32-byte wire events. Extension input events may be constructed by the server sending as many wire-sized events as necessary to return the information required for that event. The library event reformatting routines are responsible for combining these into one or more client XEvents. Any input device that generates key, button, or motion data may be used as an extension input device. Extension input devices may have zero or more keys, zero or more buttons, and may report zero or more axes of motion. Motion may be reported as relative movements from a previous position or as an absolute position. All valuators reporting motion information for a given extension input device must report the same kind of motion information (absolute or relative). This extension is designed to accommodate new types of input devices that may be added in the future. The protocol requests that refer to specific characteristics of input devices organize that information by input device classes. Server implementors may add new classes of input devices without changing the protocol requests. All extension input devices are treated like the core X key- board in determining their location and focus. The server does not track the location of these devices on an individ- ual basis and, therefore, does not echo a cursor to indicate their current location. Instead, their location is deter- mined by the location of the core X pointer. Like the core X keyboard, some may be explicitly focused. If they are not explicitly focused, their focus is determined by the loca- tion of the core X pointer. 2 X Input Extension Library X11, Release 6.4 1.3.1. Input Device Classes Some of the input extension requests divide input devices into classes based on their functionality. This is intended to allow new classes of input devices to be defined at a later time without changing the semantics of these func- tions. The following input device classes are currently defined: KEY The device reports key events. BUTTON The device reports button events. VALUATOR The device reports valuator data in motion events. PROXIMITY The device reports proximity events. FOCUS The device can be focused. FEEDBACK The device supports feedbacks. Additional classes may be added in the future. Functions that support multiple input classes, such as the XListInput- Devices function that lists all available input devices, organize the data they return by input class. Client pro- grams that use these functions should not access data unless it matches a class defined at the time those clients were compiled. In this way, new classes can be added without forcing existing clients that use these functions to be recompiled. 1.4. Using Extension Input Devices A client that wishes to access an input device does so through the library functions defined in the following sec- tions. A typical sequence of requests that a client would make is as follows: o XListInputDevices - lists all of the available input devices. From the information returned by this request, determine whether the desired input device is attached to the server. For a description of the XListInputDevices request, see the section entitled ``Listing Available Devices.'' o XOpenDevice - requests that the server open the device for access by this client. This request returns an XDevice structure that is used by most other input extension requests to identify the specified device. For a description of the XOpenDevice request, see the section entitled ``Enabling and Disabling Extension Devices.'' 3 X Input Extension Library X11, Release 6.4 o Determine the event types and event classes needed to select the desired input extension events, and identify them when they are received. This is done via macros whose name corresponds to the desired event, for exam- ple, DeviceKeyPress. For a description of these macros, see the section entitled ``Selecting Extension Device Events.'' o XSelectExtensionEvent - selects the desired events from the server. For a description of the XSelextExtension- Event request, see the section entitled ``Selecting Extension Device Events.'' o XNextEvent - receives the next available event. This is the core XNextEvent function provided by the stan- dard X libarary. Other requests are defined to grab and focus extension devices, to change their key, button, or modifier mappings, to control the propagation of input extension events, to get motion history from an extension device, and to send input extension events to another client. These functions are described in the following sections. 2. Library Extension Requests Extension input devices are accessed by client programs through the use of new protocol requests. The following requests are provided as extensions to Xlib. Constants and structures referenced by these functions may be found in the files and , which are attached to this document as Appendix A. The library will return NoSuchExtension if an extension request is made to a server that does not support the input extension. Input extension requests cannot be used to access the X key- board and X pointer devices. 2.1. Window Manager Functions This section discusses the following X Input Extension Win- dow Manager topics: o Changing the core devices o Event synchronization and core grabs o Extension active grabs o Passively grabbing a key 4 X Input Extension Library X11, Release 6.4 o Passively grabbing a button o Thawing a device o Controlling device focus o Controlling device feedback o Ringing a bell on an input device o Controlling device encoding o Controlling button mapping o Obtaining the state of a device 2.1.1. Changing the Core Devices These functions are provided to change which physical device is used as the X pointer or X keyboard. Note Using these functions may change the characteris- tics of the core devices. The new pointer device may have a different number of buttons from the old one, or the new keyboard device may have a different number of keys or report a different range of keycodes. Client programs may be running that depend on those characteristics. For exam- ple, a client program could allocate an array based on the number of buttons on the pointer device and then use the button numbers received in button events as indices into that array. Chang- ing the core devices could cause such client pro- grams to behave improperly or to terminate abnor- mally if they ignore the ChangeDeviceNotify event generated by these requests. These functions change the X keyboard or X pointer device and generate an XChangeDeviceNotify event and a MappingNo- tify event. The specified device becomes the new X keyboard or X pointer device. The location of the core device does not change as a result of this request. These requests fail and return AlreadyGrabbed if either the specified device or the core device it would replace are grabbed by some other client. They fail and return GrabFrozen if either device is frozen by the active grab of another client. These requests fail with a BadDevice error if the specified device is invalid, has not previously been opened via 5 X Input Extension Library X11, Release 6.4 XOpenDevice, or is not supported as a core device by the server implementation. Once the device has successfully replaced one of the core devices, it is treated as a core device until it is in turn replaced by another ChangeDevice request or until the server terminates. The termination of the client that changed the device will not cause it to change back. Attempts to use the XCloseDevice request to close the new core device will fail with a BadDevice error. To change which physical device is used as the X keyboard, use the XChangeKeyboardDevice function. The specified device must support input class Keys (as reported in the ListInputDevices request) or the request will fail with a BadMatch error. __ | int XChangeKeyboardDevice(display, device) Display *display; XDevice *device; display Specifies the connection to the X server. device Specifies the desired device. |__ If no error occurs, XChangeKeyboardDevice returns Success. A ChangeDeviceNotify event with the request field set to NewKeyboard is sent to all clients selecting that event. A MappingNotify event with the request field set to Map- pingKeyboard is sent to all clients. The requested device becomes the X keyboard, and the old keyboard becomes avail- able as an extension input device. The focus state of the new keyboard is the same as the focus state of the old X keyboard. XChangeKeyboardDevice can generate AlreadyGrabbed, BadDe- vice, BadMatch, and GrabFrozen errors. To change which physical device is used as the X pointer, use the XChangePointerDevice function. The specified device must support input class Valuators (as reported in the XListInputDevices request) and report at least two axes of motion, or the request will fail with a BadMatch error. If the specified device reports more than two axes, the two specified in the xaxis and yaxis arguments will be used. Data from other valuators on the device will be ignored. 6 X Input Extension Library X11, Release 6.4 If the specified device reports absolute positional informa- tion, and the server implementation does not allow such a device to be used as the X pointer, the request will fail with a BadDevice error. __ | int XChangePointerDevice(display, device, xaxis, yaxis) Display *display; XDevice *device; int xaxis; int yaxis; display Specifies the connection to the X server. device Specifies the desired device. xaxis Specifies the zero-based index of the axis to be used as the x-axis of the pointer device. yaxis Specifies the zero-based index of the axis to be used as the y-axis of the pointer device. |__ If no error occurs, XChangePointerDevice returns Success. A ChangeDeviceNotify event with the request field set to New- Pointer is sent to all clients selecting that event. A Map- pingNotify event with the request field set to Mapping- Pointer is sent to all clients. The requested device becomes the X pointer, and the old pointer becomes available as an extension input device. XChangePointerDevice can generate AlreadyGrabbed, BadDevice, BadMatch, and GrabFrozen errors. 2.1.2. Event Synchronization and Core Grabs Implementation of the input extension requires an extension of the meaning of event synchronization for the core grab requests. This is necessary in order to allow window man- agers to freeze all input devices with a single request. The core grab requests require a pointer_mode and key- board_mode argument. The meaning of these modes is changed by the input extension. For the XGrabPointer and XGrabBut- ton requests, pointer_mode controls synchronization of the pointer device, and keyboard_mode controls the synchroniza- tion of all other input devices. For the XGrabKeyboard and XGrabKey requests, pointer_mode controls the synchronization of all input devices, except the X keyboard, while key- board_mode controls the synchronization of the keyboard. When using one of the core grab requests, the synchroniza- tion of extension devices is controlled by the mode speci- fied for the device not being grabbed. 7 X Input Extension Library X11, Release 6.4 2.1.3. Extension Active Grabs Active grabs of extension devices are supported via the XGrabDevice function in the same way that core devices are grabbed using the core XGrabKeyboard function, except that an extension input device is passed as a function parameter. The XUngrabDevice function allows a previous active grab for an extension device to be released. Passive grabs of buttons and keys on extension devices are supported via the XGrabDeviceButton and XGrabDeviceKey func- tions. These passive grabs are released via the XUngrabDe- viceKey and XUngrabDeviceButton functions. To grab an extension device, use the XGrabDevice function. The device must have previously been opened using the XOpen- Device function. 8 X Input Extension Library X11, Release 6.4 __ | int XGrabDevice(display, device, grab_window, owner_events, event_count, event_list, this_device_mode, other_device_mode, time) Display *display; XDevice *device; Window grab_window; Bool owner_events; int event_count; XEventClass *event_list; int this_device_mode; int other_device_mode; Time time; display Specifies the connection to the X server. device Specifies the desired device. grab_window Specifies the ID of a window associated with the device specified above. owner_events Specifies a boolean value of either True or False. event_count Specifies the number of elements in the event_list array. event_list Specifies a pointer to a list of event classes that indicate which events the client wishes to receive. These event classes must have been obtained using the device being grabbed. this_device_mode Controls further processing of events from this device. You can pass one of these constants: GrabModeSync or GrabModeAsync. other_device_mode Controls further processing of events from all other devices. You can pass one of these con- stants: GrabModeSync or GrabModeAsync. time Specifies the time. This may be either a time- stamp expressed in milliseconds or CurrentTime. |__ XGrabDevice actively grabs an extension input device and generates DeviceFocusIn and DeviceFocusOut events. Further input events from this device are reported only to the grab- bing client. This function overrides any previous active grab by this client for this device. 9 X Input Extension Library X11, Release 6.4 The event_list parameter is a pointer to a list of event classes. This list indicates which events the client wishes to receive while the grab is active. If owner_events is False, input events from this device are reported with respect to grab_window and are reported only if specified in event_list. If owner_events is True, then if a generated event would normally be reported to this client, it is reported normally. Otherwise, the event is reported with respect to the grab_window and is only reported if specified in event_list. The this_device_mode argument controls the further process- ing of events from this device, and the other_device_mode argument controls the further processing of input events from all other devices. o If the this_device_mode argument is GrabModeAsync, device event processing continues normally; if the device is currently frozen by this client, then pro- cessing of device events is resumed. If the this_device_mode argument is GrabModeSync, the state of the grabbed device (as seen by client applications) appears to freeze, and no further device events are generated by the server until the grabbing client issues a releasing XAllowDeviceEvents call or until the device grab is released. Actual device input events are not lost while the device is frozen; they are sim- ply queued for later processing. o If the other_device_mode is GrabModeAsync, event pro- cessing from other input devices is unaffected by acti- vation of the grab. If other_device_mode is GrabMod- eSync, the state of all devices except the grabbed device (as seen by client applications) appears to freeze, and no further events are generated by the server until the grabbing client issues a releasing XAllowEvents or XAllowDeviceEvents call or until the device grab is released. Actual events are not lost while the other devices are frozen; they are simply queued for later processing. XGrabDevice fails on the following conditions: o If the device is actively grabbed by some other client, it returns AlreadyGrabbed. o If grab_window is not viewable, it returns GrabNotView- able. o If the specified time is earlier than the last-grab- time for the specified device or later than the current X server time, it returns GrabInvalidTime. Otherwise, the last-grab-time for the specified device is set to the specified time and CurrentTime is replaced by the 10 X Input Extension Library X11, Release 6.4 current X server time. o If the device is frozen by an active grab of another client, it returns GrabFrozen. If a grabbed device is closed by a client while an active grab by that client is in effect, that active grab will be released. Any passive grabs established by that client will be released. If the device is frozen only by an active grab of the requesting client, it is thawed. XGrabDevice can generate BadClass, BadDevice, BadValue, and BadWindow errors. To release a grab of an extension device, use the XUngrabDe- vice function. __ | int XUngrabDevice(display, device, time) Display *display; XDevice *device; Time time; display Specifies the connection to the X server. device Specifies the desired device. time Specifies the time. This may be either a time- stamp expressed in milliseconds, or CurrentTime. |__ XUngrabDevice allows a client to release an extension input device and any queued events if this client has it grabbed from either XGrabDevice or XGrabDeviceKey. If any other devices are frozen by the grab, XUngrabDevice thaws them. This function does not release the device and any queued events if the specified time is earlier than the last- device-grab time or is later than the current X server time. It also generates DeviceFocusIn and DeviceFocusOut events. The X server automatically performs an XUngrabDevice if the event window for an active device grab becomes not viewable or if the client terminates without releasing the grab. XUngrabDevice can generate BadDevice errors. 2.1.4. Passively Grabbing a Key To passively grab a single key on an extension device, use XGrabDeviceKey. That device must have previously been opened using the XOpenDevice function, or the request will fail with a BadDevice error. If the specified device does 11 X Input Extension Library X11, Release 6.4 not support input class Keys, the request will fail with a BadMatch error. 12 X Input Extension Library X11, Release 6.4 __ | int XGrabDeviceKey(display, device, keycode, modifiers, modifier_device, grab_window, owner_events, event_count, event_list, this_device_mode, other_device_mode) Display *display; XDevice *device; int keycode; unsigned int modifiers; XDevice *modifier_device; Window grab_window; Bool owner_events; int event_count; XEventClass *event_list; int this_device_mode; int other_device_mode; display Specifies the connection to the X server. device Specifies the desired device. keycode Specifies the keycode of the key that is to be grabbed. You can pass either the keycode or AnyKey. modifiers Specifies the set of keymasks. This mask is the bitwise inclusive OR of these keymask bits: Shift- Mask, LockMask, ControlMask, Mod1Mask, Mod2Mask, Mod3Mask, Mod4Mask, and Mod5Mask. You can also pass AnyModifier, which is equivalent to issuing the grab key request for all possible modifier combinations (including the combination of no modifiers). modifier_device Specifies the device whose modifiers are to be used. If NULL is specified, the core X keyboard is used as the modifier_device. grab_window Specifies the ID of a window associated with the device specified above. owner_events Specifies a boolean value of either True or False. event_count Specifies the number of elements in the event_list array. event_list Specifies a pointer to a list of event classes that indicate which events the client wishes to receive. 13 X Input Extension Library X11, Release 6.4 this_device_mode Controls further processing of events from this device. You can pass one of these constants: GrabModeSync or GrabModeAsync. other_device_mode Controls further processing of events from all other devices. You can pass one of these con- stants: GrabModeSync or GrabModeAsync. |__ XGrabDeviceKey is analogous to the core XGrabKey function. It creates an explicit passive grab for a key on an exten- sion device. The XGrabDeviceKey function establishes a pas- sive grab on a device. Consequently, in the future, o IF the device is not grabbed and the specified key, which itself can be a modifier key, is logically pressed when the specified modifier keys logically are down on the specified modifier device (and no other keys are down), o AND no other modifier keys logically are down, o AND EITHER the grab window is an ancestor of (or is) the focus window or the grab window is a descendent of the focus window and contains the pointer, o AND a passive grab on the same device and key combina- tion does not exist on any ancestor of the grab window, o THEN the device is actively grabbed, as for XGrabDe- vice, the last-device-grab time is set to the time at which the key was pressed (as transmitted in the DeviceKeyPress event), and the DeviceKeyPress event is reported. The interpretation of the remaining arguments is as for XGrabDevice. The active grab is terminated automatically when the logical state of the device has the specified key released (independent of the logical state of the modifier keys). Note that the logical state of a device (as seen by means of the X protocol) may lag the physical state if device event processing is frozen. A modifier of AnyModifier is equivalent to issuing the request for all possible modifier combinations (including the combination of no modifiers). It is not required that all modifiers specified have currently assigned keycodes. A key of AnyKey is equivalent to issuing the request for all possible keycodes. Otherwise, the key must be in the range specified by min_keycode and max_keycode in the information 14 X Input Extension Library X11, Release 6.4 returned by the XListInputDevices function. If it is not within that range, XGrabDeviceKey generates a BadValue error. XGrabDeviceKey generates a BadAccess error if some other client has issued a XGrabDeviceKey with the same device and key combination on the same window. When using AnyModifier or AnyKey, the request fails completely and the X server generates a BadAccess error, and no grabs are established if there is a conflicting grab for any combination. XGrabDeviceKey returns Success upon successful completion of the request. XGrabDeviceKey can generate BadAccess, BadClass, BadDevice, BadMatch, BadValue, and BadWindow errors. To release a passive grab of a single key on an extension device, use XUngrabDeviceKey. 15 X Input Extension Library X11, Release 6.4 __ | int XUngrabDeviceKey(display, device, keycode, modifiers, modifier_device, ungrab_window) Display *display; XDevice *device; int keycode; unsigned int modifiers; XDevice *modifier_device; Window ungrab_window; display Specifies the connection to the X server. device Specifies the desired device. keycode Specifies the keycode of the key that is to be ungrabbed. You can pass either the keycode or AnyKey. modifiers Specifies the set of keymasks. This mask is the bitwise inclusive OR of these keymask bits: Shift- Mask, LockMask, ControlMask, Mod1Mask, Mod2Mask, Mod3Mask, Mod4Mask, and Mod5Mask. You can also pass AnyModifier, which is equivalent to issuing the ungrab key request for all possible modifier combinations (including the combination of no modifiers). modifier_device Specifies the device whose modifiers are to be used. If NULL is specified, the core X keyboard is used as the modifier_device. ungrab_window Specifies the ID of a window associated with the device specified above. |__ XUngrabDeviceKey is analogous to the core XUngrabKey func- tion. It releases an explicit passive grab for a key on an extension input device. XUngrabDeviceKey can generate BadAlloc, BadDevice, BadMatch, BadValue, and BadWindow errors. 2.1.5. Passively Grabbing a Button To establish a passive grab for a single button on an exten- sion device, use XGrabDeviceButton. The specified device must have previously been opened using the XOpenDevice func- tion, or the request will fail with a BadDevice error. If the specified device does not support input class Buttons, the request will fail with a BadMatch error. 16 X Input Extension Library X11, Release 6.4 __ | int XGrabDeviceButton(display, device, button, modifiers, modifier_device , grab_window, owner_events, event_count, event_list, this_device_mode, other_device_mode) Display *display; XDevice *device; unsigned int button; unsigned int modifiers; XDevice *modifier_device ; Window grab_window; Bool owner_events; int event_count; XEventClass *event_list; int this_device_mode; int other_device_mode; display Specifies the connection to the X server. device Specifies the desired device. button Specifies the code of the button that is to be grabbed. You can pass either the button or Any- Button. modifiers Specifies the set of keymasks. This mask is the bitwise inclusive OR of these keymask bits: Shift- Mask, LockMask, ControlMask, Mod1Mask, Mod2Mask, Mod3Mask, Mod4Mask, and Mod5Mask. You can also pass AnyModifier, which is equivalent to issuing the grab request for all possible modi- fier combinations (including the combination of no modifiers). modifier_device Specifies the device whose modifiers are to be used. If NULL is specified, the core X keyboard is used as the modifier_device. grab_window Specifies the ID of a window associated with the device specified above. owner_events Specifies a boolean value of either True or False. event_count Specifies the number of elements in the event_list array. event_list Specifies a list of event classes that indicates which device events are to be reported to the client. 17 X Input Extension Library X11, Release 6.4 this_device_mode Controls further processing of events from this device. You can pass one of these constants: GrabModeSync or GrabModeAsync. other_device_mode Controls further processing of events from all other devices. You can pass one of these con- stants: GrabModeSync or GrabModeAsync. |__ XGrabDeviceButton is analogous to the core XGrabButton func- tion. It creates an explicit passive grab for a button on an extension input device. Because the server does not track extension devices, no cursor is specified with this request. For the same reason, there is no confine_to param- eter. The device must have previously been opened using the XOpenDevice function. The XGrabDeviceButton function establishes a passive grab on a device. Consequently, in the future, o IF the device is not grabbed and the specified button is logically pressed when the specified modifier keys logically are down (and no other buttons or modifier keys are down), o AND EITHER the grab window is an ancestor of (or is) the focus window OR the grab window is a descendent of the focus window and contains the pointer, o AND a passive grab on the same device and button/key combination does not exist on any ancestor of the grab window, o THEN the device is actively grabbed, as for XGrabDe- vice, the last-grab time is set to the time at which the button was pressed (as transmitted in the Device- ButtonPress event), and the DeviceButtonPress event is reported. The interpretation of the remaining arguments is as for XGrabDevice. The active grab is terminated automatically when logical state of the device has all buttons released (independent of the logical state of the modifier keys). Note that the logical state of a device (as seen by means of the X protocol) may lag the physical state if device event processing is frozen. A modifier of AnyModifier is equivalent to issuing the request for all possible modifier combinations (including the combination of no modifiers). It is not required that all modifiers specified have currently assigned keycodes. A 18 X Input Extension Library X11, Release 6.4 button of AnyButton is equivalent to issuing the request for all possible buttons. Otherwise, it is not required that the specified button be assigned to a physical button. XGrabDeviceButton generates a BadAccess error if some other client has issued a XGrabDeviceButton with the same device and button combination on the same window. When using Any- Modifier or AnyButton, the request fails completely and the X server generates a BadAccess error and no grabs are estab- lished if there is a conflicting grab for any combination. XGrabDeviceButton can generate BadAccess, BadClass, BadDe- vice, BadMatch, BadValue, and BadWindow errors. To release a passive grab of a button on an extension device, use XUngrabDeviceButton. 19 X Input Extension Library X11, Release 6.4 __ | int XUngrabDeviceButton(display, device, button, modifiers, modifier_device, ungrab_window) Display *display; XDevice *device; unsigned int button; unsigned int modifiers; XDevice *modifier_device; Window ungrab_window; display Specifies the connection to the X server. device Specifies the desired device. button Specifies the code of the button that is to be ungrabbed. You can pass either a button or Any- Button. modifiers Specifies the set of keymasks. This mask is the bitwise inclusive OR of these keymask bits: Shift- Mask, LockMask, ControlMask, Mod1Mask, Mod2Mask, Mod3Mask, Mod4Mask, and Mod5Mask. You can also pass AnyModifier, which is equivalent to issuing the ungrab key request for all possible modifier combinations (including the combination of no modifiers). modifier_device Specifies the device whose modifiers are to be used. If NULL is specified, the core X keyboard is used as the modifier_device. ungrab_window Specifies the ID of a window associated with the device specified above. |__ XUngrabDeviceButton is analogous to the core XUngrabButton function. It releases an explicit passive grab for a button on an extension device. That device must have previously been opened using the XOpenDevice function, or a BadDevice error will result. A modifier of AnyModifier is equivalent to issuing the request for all possible modifier combinations (including the combination of no modifiers). XUngrabDeviceButton can generate BadAlloc, BadDevice, Bad- Match, BadValue, and BadWindow errors. 20 X Input Extension Library X11, Release 6.4 2.1.6. Thawing a Device To allow further events to be processed when a device has been frozen, use XAllowDeviceEvents. __ | int XAllowDeviceEvents(display, device, event_mode, time) Display *display; XDevice *device; int event_mode; Time time; display Specifies the connection to the X server. device Specifies the desired device. event_mode Specifies the event mode. You can pass one of these constants: AsyncThisDevice, SyncThisDevice, AsyncOtherDevices, ReplayThisDevice, AsyncAll, or SyncAll. time Specifies the time. This may be either a time- stamp expressed in milliseconds, or CurrentTime. |__ XAllowDeviceEvents releases some queued events if the client has caused a device to freeze. It has no effect if the specified time is earlier than the last-grab time of the most recent active grab for the client and device, or if the specified time is later than the current X server time. The following describes the processing that occurs depending on what constant you pass to the event_mode argument: o AsyncThisDevice If the specified device is frozen by the client, event processing for that continues as usual. If the device is frozen multiple times by the client on behalf of multiple separate grabs, AsyncThisDevice thaws for all. AsyncThisDevice has no effect if the specified device is not frozen by the client, but the device need not be grabbed by the client. o SyncThisDevice If the specified device is frozen and actively grabbed by the client, event processing for that device contin- ues normally until the next key or button event is reported to the client. At this time, the specified device again appears to freeze. However, if the reported event causes the grab to be released, the specified device does not freeze. SyncThisDevice has 21 X Input Extension Library X11, Release 6.4 no effect if the specified device is not frozen by the client or is not grabbed by the client. o ReplayThisDevice If the specified device is actively grabbed by the client and is frozen as the result of an event having been sent to the client (either from the activation of a GrabDeviceButton or from a previous AllowDeviceEvents with mode SyncThisDevice, but not from a Grab), the grab is released and that event is completely repro- cessed. This time, however, the request ignores any passive grabs at or above (toward the root) the grab- window of the grab just released. The request has no effect if the specified device is not grabbed by the client or if it is not frozen as the result of an event. o AsyncOtherDevices If the remaining devices are frozen by the client, event processing for them continues as usual. If the other devices are frozen multiple times by the client on behalf of multiple separate grabs, AsyncOtherDevices ``thaws'' for all. AsyncOtherDevices has no effect if the devices are not frozen by the client, but those devices need not be grabbed by the client. o SyncAll If all devices are frozen by the client, event process- ing (for all devices) continues normally until the next button or key event is reported to the client for a grabbed device, at which time the devices again appear to freeze. However, if the reported event causes the grab to be released, then the devices do not freeze (but if any device is still grabbed, then a subsequent event for it will still cause all devices to freeze). SyncAll has no effect unless all devices are frozen by the client. If any device is frozen twice by the client on behalf of two separate grabs, SyncAll "thaws" for both (but a subsequent freeze for SyncAll will freeze each device only once). o AsyncAll If all devices are frozen by the client, event process- ing (for all devices) continues normally. If any device is frozen multiple times by the client on behalf of multiple separate grabs, AsyncAll ``thaws ''for all. If any device is frozen twice by the client on behalf of two separate grabs, AsyncAll ``thaws'' for both. AsyncAll has no effect unless all devices are frozen by the client. 22 X Input Extension Library X11, Release 6.4 AsyncThisDevice, SyncThisDevice, and ReplayThisDevice have no effect on the processing of events from the remaining devices. AsyncOtherDevices has no effect on the processing of events from the specified device. When the event_mode is SyncAll or AsyncAll, the device parameter is ignored. It is possible for several grabs of different devices (by the same or different clients) to be active simultaneously. If a device is frozen on behalf of any grab, no event pro- cessing is performed for the device. It is possible for a single device to be frozen because of several grabs. In this case, the freeze must be released on behalf of each grab before events can again be processed. XAllowDeviceEvents can generate BadDevice and BadValue errors. 2.1.7. Controlling Device Focus The current focus window for an extension input device can be determined using the XGetDeviceFocus function. Extension devices are focused using the XSetDeviceFocus function in the same way that the keyboard is focused using the core XSetInputFocus function, except that a device ID is passed as a function parameter. One additional focus state, Fol- lowKeyboard, is provided for extension devices. To get the current focus state, revert state, and focus time of an extension device, use XGetDeviceFocus. 23 X Input Extension Library X11, Release 6.4 __ | int XGetDeviceFocus(display, device, focus_return, revert_to_return, focus_time_return) Display *display; XDevice *device; Window *focus_return; int *revert_to_return; Time *focus_time_return; display Specifies the connection to the X server. device Specifies the desired device. focus_return Specifies the address of a variable into which the server can return the ID of the window that con- tains the device focus or one of the constants None, PointerRoot, or FollowKeyboard. revert_to_return Specifies the address of a variable into which the server can return the current revert_to status for the device. focus_time_return Specifies the address of a variable into which the server can return the focus time last set for the device. |__ XGetDeviceFocus returns the focus state, the revert-to state, and the last-focus-time for an extension input device. XGetDeviceFocus can generate BadDevice and BadMatch errors. To set the focus of an extension device, use XSetDeviceFo- cus. 24 X Input Extension Library X11, Release 6.4 __ | int XSetDeviceFocus(display, device, focus, revert_to, time) Display *display; XDevice *device; Window focus; int revert_to; Time time; display Specifies the connection to the X server. device Specifies the desired device. focus Specifies the ID of the window to which the device's focus should be set. This may be a win- dow ID, or PointerRoot, FollowKeyboard, or None. revert_to Specifies to which window the focus of the device should revert if the focus window becomes not viewable. One of the following constants may be passed: RevertToParent, RevertToPointerRoot, RevertToNone, or RevertToFollowKeyboard. time Specifies the time. You can pass either a time- stamp, expressed in milliseconds, or CurrentTime. |__ XSetDeviceFocus changes the focus for an extension input device and the last-focus-change-time. It has no effect if the specified time is earlier than the last-focus-change- time or is later than the current X server time. Otherwise, the last-focus-change-time is set to the specified time. This function causes the X server to generate DeviceFocusIn and DeviceFocusOut events. The action taken by the server when this function is requested depends on the value of the focus argument: o If the focus argument is None, all input events from this device will be discarded until a new focus window is set. In this case, the revert_to argument is ignored. o If the focus argument is a window ID, it becomes the focus window of the device. If an input event from the device would normally be reported to this window or to one of its inferiors, the event is reported normally. Otherwise, the event is reported relative to the focus window. o If the focus argument is PointerRoot, the focus window is dynamically taken to be the root window of whatever screen the pointer is on at each input event. In this case, the revert_to argument is ignored. 25 X Input Extension Library X11, Release 6.4 o If the focus argument is FollowKeyboard, the focus win- dow is dynamically taken to be the same as the focus of the X keyboard at each input event. The specified focus window must be viewable at the time XSetDeviceFocus is called. Otherwise, it generates a Bad- Match error. If the focus window later becomes not view- able, the X server evaluates the revert_to argument to determine the new focus window. o If the revert_to argument is RevertToParent, the focus reverts to the parent (or the closest viewable ances- tor), and the new revert_to value is taken to be RevertToNone. o If the revert_to argument is RevertToPointerRoot, RevertToFollowKeyboard, or RevertToNone, the focus reverts to that value. When the focus reverts, the X server generates DeviceFocusIn and DeviceFocusOut events, but the last-focus-change time is not affected. XSetDeviceFocus can generate BadDevice, BadMatch, BadValue, and BadWindow errors. 2.1.8. Controlling Device Feedback To determine the current feedback settings of an extension input device, use XGetFeedbackControl. __ | XFeedbackState * XGetFeedbackControl(display, device, num_feedbacks_return) Display *display; XDevice *device; int *num_feedbacks_return; display Specifies the connection to the X server. device Specifies the desired device. num_feedbacks_return Returns the number of feedbacks supported by the device. |__ XGetFeedbackControl returns a list of FeedbackState struc- tures that describe the feedbacks supported by the specified device. There is an XFeedbackState structure for each class of feedback. These are of variable length, but the first three members are common to all. 26 X Input Extension Library X11, Release 6.4 __ | typedef struct { XID class; int length; XID id; } XFeedbackState; |__ The common members are as follows: o The class member identifies the class of feedback. It may be compared to constants defined in the file . Currently defined feedback con- stants include: KbdFeedbackClass, PtrFeedbackClass, StringFeedbackClass, IntegerFeedbackClass, LedFeedback- Class, and BellFeedbackClass. o The length member specifies the length of the Feedback- State structure and can be used by clients to traverse the list. o The id member uniquely identifies a feedback for a given device and class. This allows a device to sup- port more than one feedback of the same class. Other feedbacks of other classes or devices may have the same ID. Those feedbacks equivalent to those supported by the core keyboard are reported in class KbdFeedback using the XKbd- FeedbackState structure, which is defined as follows: __ | typedef struct { XID class; int length; XID id; int click; int percent; int pitch; int duration; int led_mask; int global_auto_repeat; char auto_repeats[32]; } XKbdFeedbackState; |__ The additional members of the XKbdFeedbackState structure report the current state of the feedback: 27 X Input Extension Library X11, Release 6.4 o The click member specifies the key-click volume and has a value in the range 0 (off) to 100 (loud). o The percent member specifies the bell volume and has a value in the range 0 (off) to 100 (loud). o The pitch member specifies the bell pitch in Hz. The range of the value is implementation-dependent. o The duration member specifies the duration in millisec- onds of the bell. o The led_mask member is a bit mask that describes the current state of up to 32 LEDs. A value of 1 in a bit indicates that the corresponding LED is on. o The global_auto_repeat member has a value of AutoRe- peatModeOn or AutoRepeatModeOff. o The auto_repeats member is a bit vector. Each bit set to 1 indicates that auto-repeat is enabled for the cor- responding key. The vector is represented as 32 bytes. Byte N (from 0) contains the bits for keys 8N to 8N + 7, with the least significant bit in the byte repre- senting key 8N. Those feedbacks equivalent to those supported by the core pointer are reported in class PtrFeedback using the XPtr- FeedbackState structure, which is defined as follows: __ | typedef struct { XID class; int length; XID id; int accelNum; int accelDenom; int threshold; } XPtrFeedbackState; |__ The additional members of the XPtrFeedbackState structure report the current state of the feedback: o The accelNum member returns the numerator for the acceleration multiplier. o The accelDenom member returns the denominator for the acceleration multiplier. 28 X Input Extension Library X11, Release 6.4 o The accelDenom member returns the threshold for the acceleration. Integer feedbacks are those capable of displaying integer numbers and reported via the XIntegerFeedbackState struc- ture. The minimum and maximum values that they can display are reported. __ | typedef struct { XID class; int length; XID id; int resolution; int minVal; int maxVal; } XIntegerFeedbackState; |__ The additional members of the XIntegerFeedbackState struc- ture report the capabilities of the feedback: o The resolution member specifies the number of digits that the feedback can display. o The minVal member specifies the minimum value that the feedback can display. o The maxVal specifies the maximum value that the feed- back can display. String feedbacks are those that can display character infor- mation and are reported via the XStringFeedbackState struc- ture. Clients set these feedbacks by passing a list of KeySyms to be displayed. The XGetFeedbackControl function returns the set of key symbols that the feedback can dis- play, as well as the maximum number of symbols that can be displayed. The XStringFeedbackState structure is defined as follows: 29 X Input Extension Library X11, Release 6.4 __ | typedef struct { XID class; int length; XID id; int max_symbols; int num_syms_supported; KeySym *syms_supported; } XStringFeedbackState; |__ The additional members of the XStringFeedbackState structure report the capabilities of the feedback: o The max_symbols member specifies the maximum number of symbols that can be displayed. o The syms_supported member is a pointer to the list of supported symbols. o The num_syms_supported member specifies the length of the list of supported symbols. Bell feedbacks are those that can generate a sound and are reported via the XBellFeedbackState structure. Some imple- mentations may support a bell as part of a KbdFeedback feed- back. Class BellFeedback is provided for implementations that do not choose to do so and for devices that support multiple feedbacks that can produce sound. The meaning of the members is the same as that of the corresponding fields in the XKbdFeedbackState structure. __ | typedef struct { XID class; int length; XID id; int percent; int pitch; int duration; } XBellFeedbackState; |__ Led feedbacks are those that can generate a light and are reported via the XLedFeedbackState structure. Up to 32 lights per feedback are supported. Each bit in led_mask corresponds to one supported light, and the corresponding bit in led_values indicates whether that light is currently on (1) or off (0). Some implementations may support leds as part of a KbdFeedback feedback. Class LedFeedback is 30 X Input Extension Library X11, Release 6.4 provided for implementations that do not choose to do so and for devices that support multiple led feedbacks. __ | typedef struct { XID class; int length; XID id; Mask led_values; Mask led_mask; } XLedFeedbackState; |__ XGetFeedbackControl can generate BadDevice and BadMatch errors. To free the information returned by the XGetFeedbackControl function, use XFreeFeedbackList. __ | void XFreeFeedbackList(list) XFeedbackState *list; list Specifies the pointer to the XFeedbackState struc- ture returned by a previous call to XGetFeedback- Control. |__ XFreeFeedbackList frees the list of feedback control infor- mation. To change the settings of a feedback on an extension device, use XChangeFeedbackControl. This function modifies the cur- rent control values of the specified feedback using informa- tion passed in the appropriate XFeedbackControl structure for the feedback. Which values are modified depends on the valuemask passed. 31 X Input Extension Library X11, Release 6.4 __ | int XChangeFeedbackControl(display, device, valuemask, value) Display *display; XDevice *device; unsigned long valuemask; XFeedbackControl *value; display Specifies the connection to the X server. device Specifies the desired device. valuemask Specifies one value for each bit in the mask (least to most significant bit). The values are associated with the feedbacks for the specified device. value Specifies a pointer to the XFeedbackControl struc- ture. |__ XChangeFeedbackControl controls the device characteristics described by the XFeedbackControl structure. There is an XFeedbackControl structure for each class of feedback. These are of variable length, but the first three members are common to all and are as follows: __ | typedef struct { XID class; int length; XID id; } XFeedbackControl; |__ Feedback class KbdFeedback controls feedbacks equivalent to those provided by the core keyboard using the KbdFeedback- Control structure, which is defined as follows:. 32 X Input Extension Library X11, Release 6.4 __ | typedef struct { XID class; int length; XID id; int click; int percent; int pitch; int duration; int led_mask; int led_value; int key; int auto_repeat_mode; } XKbdFeedbackControl; |__ This class controls the device characteristics described by the XKbdFeedbackControl structure. These include the key_click_percent, global_auto_repeat, and individual key auto-repeat. Valid modes are AutoRepeatModeOn, AutoRepeat- ModeOff, and AutoRepeatModeDefault. Valid masks are as follows: __ | #define DvKeyClickPercent (1L << 0) #define DvPercent (1L << 1) #define DvPitch (1L << 2) #define DvDuration (1L << 3) #define DvLed (1L << 4) #define DvLedMode (1L << 5) #define DvKey (1L << 6) #define DvAutoRepeatMode (1L << 7) |__ Feedback class PtrFeedback controls feedbacks equivalent to those provided by the core pointer using the PtrFeedbackCon- trol structure, which is defined as follows: 33 X Input Extension Library X11, Release 6.4 __ | typedef struct { XID class; int length; XID id; int accelNum; int accelDenom; int threshold; } XPtrFeedbackControl; |__ Which values are modified depends on the valuemask passed. Valid masks are as follows: __ | #define DvAccelnum (1L << 0) #define DvAccelDenom (1L << 1) #define DvThreshold (1L << 2) |__ The acceleration, expressed as a fraction, is a multiplier for movement. For example, specifying 3/1 means that the device moves three times as fast as normal. The fraction may be rounded arbitrarily by the X server. Acceleration takes effect only if the device moves more than threshold pixels at once and applies only to the amount beyond the value in the threshold argument. Setting a value to -1 restores the default. The values of the accelNumerator and threshold fields must be nonzero for the pointer values to be set. Otherwise, the parameters will be unchanged. Nega- tive values generate a BadValue error, as does a zero value for the accelDenominator field. This request fails with a BadMatch error if the specified device is not currently reporting relative motion. If a device that is capable of reporting both relative and abso- lute motion has its mode changed from Relative to Absolute by an XSetDeviceMode request, valuator control values will be ignored by the server while the device is in that mode. Feedback class IntegerFeedback controls integer feedbacks displayed on input devices and are reported via the Inte- gerFeedbackControl structure, which is defined as follows: 34 X Input Extension Library X11, Release 6.4 __ | typedef struct { XID class; int length; XID id; int int_to_display; } XIntegerFeedbackControl; |__ Valid masks are as follows: __ | #define DvInteger (1L << 0) |__ Feedback class StringFeedback controls string feedbacks dis- played on input devices and reported via the StringFeedback- Control structure, which is defined as follows: __ | typedef struct { XID class; int length; XID id; int num_keysyms; KeySym *syms_to_display; } XStringFeedbackControl; |__ Valid masks are as follows: __ | #define DvString (1L << 0) |__ Feedback class BellFeedback controls a bell on an input device and is reported via the BellFeedbackControl struc- ture, which is defined as follows: 35 X Input Extension Library X11, Release 6.4 __ | typedef struct { XID class; int length; XID id; int percent; int pitch; int duration; } XBellFeedbackControl; |__ Valid masks are as follows: __ | #define DvPercent (1L << 1) #define DvPitch (1L << 2) #define DvDuration (1L << 3) |__ Feedback class LedFeedback controls lights on an input device and are reported via the LedFeedbackControl struc- ture, which is defined as follows: __ | typedef struct { XID class; int length; XID id; int led_mask; int led_values; } XLedFeedbackControl; |__ Valid masks are as follows: __ | #define DvLed (1L << 4) #define DvLedMode (1L << 5) |__ XChangeFeedbackControl can generate BadDevice, BadFeedBack, BadMatch, and BadValue errors. 36 X Input Extension Library X11, Release 6.4 2.1.9. Ringing a Bell on an Input Device To ring a bell on an extension input device, use XDevice- Bell. __ | int XDeviceBell(display, device, feedbackclass, feedbackid, percent) Display *display; XDevice *device; XID feedbackclass, feedbackid; int percent; display Specifies the connection to the X server. device Specifies the desired device. feedbackclass Specifies the feedbackclass. Valid values are KbdFeedbackClass and BellFeedbackClass. feedbackid Specifies the ID of the feedback that has the bell. percent Specifies the volume in the range -100 (quiet) to 100 percent (loud). |__ XDeviceBell is analogous to the core XBell function. It rings the specified bell on the specified input device feed- back, using the specified volume. The specified volume is relative to the base volume for the feedback. If the value for the percent argument is not in the range -100 to 100 inclusive, a BadValue error results. The volume at which the bell rings when the percent argument is nonnegative is: base - [(base * percent) / 100] + percent The volume at which the bell rings when the percent argument is negative is: base + [(base * percent) / 100] To change the base volume of the bell, use XChangeFeedback- Control. XDeviceBell can generate BadDevice and BadValue errors. 37 X Input Extension Library X11, Release 6.4 2.1.10. Controlling Device Encoding To get the key mapping of an extension device that supports input class Keys, use XGetDeviceKeyMapping. __ | KeySym * XGetDeviceKeyMapping(display, device, first_keycode_wanted, keycode_count, keysyms_per_keycode_return) Display *display; XDevice *device; KeyCode first_keycode_wanted; int keycode_count; int *keysyms_per_keycode_return; display Specifies the connection to the X server. device Specifies the desired device. first_keycode_wanted Specifies the first keycode that is to be returned. keycode_count Specifies the number of keycodes that are to be returned. keysyms_per_keycode_return Returns the number of keysyms per keycode. |__ XGetDeviceKeyMapping is analogous to the core XGetKey- boardMapping function. It returns the symbols for the spec- ified number of keycodes for the specified extension device. XGetDeviceKeyMapping returns the symbols for the specified number of keycodes for the specified extension device, starting with the specified keycode. The first_key- code_wanted must be greater than or equal to min-keycode as returned by the XListInputDevices request (else a BadValue error results). The following value: first_keycode_wanted + keycode_count - 1 must be less than or equal to max-keycode as returned by the XListInputDevices request (else a BadValue error results). The number of elements in the keysyms list is as follows: keycode_count * keysyms_per_keycode_return And KEYSYM number N (counting from zero) for keycode K has an index (counting from zero), in keysyms, of the following: 38 X Input Extension Library X11, Release 6.4 (K - first_keycode_wanted) * keysyms_per_keycode_return + N The keysyms_per_keycode_return value is chosen arbitrarily by the server to be large enough to report all requested symbols. A special KEYSYM value of NoSymbol is used to fill in unused elements for individual keycodes. To free the data returned by this function, use XFree. If the specified device has not first been opened by this client via XOpenDevice, this request will fail with a BadDe- vice error. If that device does not support input class Keys, this request will fail with a BadMatch error. XGetDeviceKeyMapping can generate BadDevice, BadMatch, and BadValue errors. To change the keyboard mapping of an extension device that supports input class Keys, use XChangeDeviceKeyMapping. __ | int XChangeDeviceKeyMapping(display, device, first_keycode, keysyms_per_keycode, keysyms, num_codes) Display *display; XDevice *device; int first_keycode; int keysyms_per_keycode; KeySym *keysyms; int num_codes; display Specifies the connection to the X server. device Specifies the desired device. first_keycode Specifies the first keycode that is to be changed. keysyms_per_keycode Specifies the keysyms that are to be used. keysyms Specifies a pointer to an array of keysyms. num_codes Specifies the number of keycodes that are to be changed. |__ XChangeDeviceKeyMapping is analogous to the core XChangeKey- boardMapping function. It defines the symbols for the spec- ified number of keycodes for the specified extension key- board device. 39 X Input Extension Library X11, Release 6.4 If the specified device has not first been opened by this client via XOpenDevice, this request will fail with a BadDe- vice error. If the specified device does not support input class Keys, this request will fail with a BadMatch error. The number of elements in the keysyms list must be a multi- ple of keysyms_per_keycode. Otherwise, XChangeDeviceKeyMap- ping generates a BadLength error. The specified first_key- code must be greater than or equal to the min_keycode value returned by the ListInputDevices request, or this request will fail with a BadValue error. In addition, if the fol- lowing expression is not less than the max_keycode value returned by the ListInputDevices request, the request will fail with a BadValue error: first_keycode + (num_codes / keysyms_per_keycode) - 1 XChangeDeviceKeyMapping can generate BadAlloc, BadDevice, BadMatch, and BadValue errors. To obtain the keycodes that are used as modifiers on an extension device that supports input class Keys, use XGetDe- viceModifierMapping. __ | XModifierKeymap * XGetDeviceModifierMapping(display, device) Display *display; XDevice *device; display Specifies the connection to the X server. device Specifies the desired device. |__ XGetDeviceModifierMapping is analogous to the core XGetModi- fierMapping function. The XGetDeviceModifierMapping func- tion returns a newly created XModifierKeymap structure that contains the keys being used as modifiers for the specified device. The structure should be freed after use with XFreeModifierMapping. If only zero values appear in the set for any modifier, that modifier is disabled. XGetDeviceModifierMapping can generate BadDevice and Bad- Match errors. To set which keycodes are to be used as modifiers for an extension device, use XSetDeviceModifierMapping. 40 X Input Extension Library X11, Release 6.4 __ | int XSetDeviceModifierMapping(display, device, modmap) Display *display; XDevice *device; XModifierKeymap *modmap; display Specifies the connection to the X server. device Specifies the desired device. modmap Specifies a pointer to the XModifierKeymap struc- ture. |__ XSetDeviceModifierMapping is analogous to the core XSetModi- fierMapping function. The XSetDeviceModifierMapping func- tion specifies the keycodes of the keys, if any, that are to be used as modifiers. A zero value means that no key should be used. No two arguments can have the same nonzero keycode value. Otherwise, XSetDeviceModifierMapping generates a BadValue error. There are eight modifiers, and the modi- fiermap member of the XModifierKeymap structure contains eight sets of max_keypermod keycodes, one for each modifier in the order Shift, Lock, Control, Mod1, Mod2, Mod3, Mod4, and Mod5. Only nonzero keycodes have meaning in each set, and zero keycodes are ignored. In addition, all of the nonzero keycodes must be in the range specified by min_key- code and max_keycode reported by the XListInputDevices func- tion. Otherwise, XSetModifierMapping generates a BadValue error. No keycode may appear twice in the entire map. Oth- erwise, it generates a BadValue error. A X server can impose restrictions on how modifiers can be changed, for example, if certain keys do not generate up transitions in hardware or if multiple modifier keys are not supported. If some such restriction is violated, the status reply is MappingFailed, and none of the modifiers are changed. If the new keycodes specified for a modifier dif- fer from those currently defined and any (current or new) keys for that modifier are in the logically down state, the status reply is MappingBusy, and none of the modifiers are changed. XSetModifierMapping generates a DeviceMappingNo- tify event on a MappingSuccess status. XSetDeviceModifierMapping can generate BadAlloc, BadDevice, BadMatch, and BadValue errors. 2.1.11. Controlling Button Mapping To set the mapping of the buttons on an extension device, use XSetDeviceButtonMapping. 41 X Input Extension Library X11, Release 6.4 __ | int XSetDeviceButtonMapping(display, device, map, nmap) Display *display; XDevice *device; unsigned char map[]; int nmap; display Specifies the connection to the X server. device Specifies the desired device. map Specifies the mapping list. nmap Specifies the number of items in the mapping list. |__ XSetDeviceButtonMapping sets the mapping of the buttons on an extension device. If it succeeds, the X server generates a DeviceMappingNotify event, and XSetDeviceButtonMapping returns MappingSuccess. Elements of the list are indexed starting from one. The length of the list must be the same as XGetDeviceButtonMapping would return, or a BadValue error results. The index is a button number, and the element of the list defines the effective number. A zero element dis- ables a button, and elements are not restricted in value by the number of physical buttons. However, no two elements can have the same nonzero value, or a BadValue error results. If any of the buttons to be altered are logically in the down state, XSetDeviceButtonMapping returns Mapping- Busy, and the mapping is not changed. XSetDeviceButtonMapping can generate BadDevice, BadMatch, and BadValue errors. To get the button mapping, use XGetDeviceButtonMapping. 42 X Input Extension Library X11, Release 6.4 __ | int XGetDeviceButtonMapping(display, device, map_return, nmap) Display *display; XDevice *device; unsigned char map_return[]; int nmap; display Specifies the connection to the X server. device Specifies the desired device. map_return Specifies the mapping list. nmap Specifies the number of items in the mapping list. |__ XGetDeviceButtonMapping returns the current mapping of the specified extension device. Elements of the list are indexed starting from one. XGetDeviceButtonMapping returns the number of physical buttons actually on the pointer. The nominal mapping for the buttons is the identity mapping: map[i]=i. The nmap argument specifies the length of the array where the button mapping is returned, and only the first nmap elements are returned in map_return. XGetDeviceButtonMapping can generate BadDevice and BadMatch errors. 2.1.12. Obtaining the State of a Device To obtain information that describes the state of the keys, buttons, and valuators of an extension device, use XQueryDe- viceState. __ | XDeviceState * XQueryDeviceState(display, device) Display *display; XDevice *device; display Specifies the connection to the X server. device Specifies the desired device. |__ XQueryDeviceState returns a pointer to an XDeviceState structure, which points to a list of structures that describe the state of the keys, buttons, and valuators on the device: 43 X Input Extension Library X11, Release 6.4 __ | typedef struct { XID device_id; int num_classes; XInputClass *data; } XDeviceState; |__ The structures are of variable length, but the first two members are common to all and are as follows: __ | typedef struct { unsigned char class; unsigned char length; } XInputClass; |__ The class member contains a class identifier. This identi- fier can be compared with constants defined in the file . Currently defined constants are: KeyClass, ButtonClass, and ValuatorClass. The length member contains the length of the structure and can be used by clients to traverse the list. The XValuatorState structure describes the current state of the valuators on the device. The num_valuators member con- tains the number of valuators on the device. The mode mem- ber is a mask whose bits report the data mode and other state information for the device. The following bits are currently defined: DeviceMode 1 << 0Relative = 0, Absolute = 1 ProximityState 1 << 1InProximity = 0, OutOfProximity = 1 The valuators member contains a pointer to an array of inte- gers that describe the current value of the valuators. If the mode is Relative, these values are undefined. 44 X Input Extension Library X11, Release 6.4 __ | typedef struct { unsigned char class; unsigned char length; unsigned char num_valuators; unsigned char mode; int *valuators; } XValuatorState; |__ The XKeyState structure describes the current state of the keys on the device. Byte N (from 0) contains the bits for key 8N to 8N + 7 with the least significant bit in the byte representing key 8N. __ | typedef struct { unsigned char class; unsigned char length; short num_keys; char keys[32]; } XKeyState; |__ The XButtonState structure describes the current state of the buttons on the device. Byte N (from 0) contains the bits for button 8N to 8N + 7 with the least significant bit in the byte representing button 8N. __ | typedef struct { unsigned char class; unsigned char length; short num_buttons; char buttons[32]; } XButtonState; |__ XQueryDeviceState can generate BadDevice errors. To free the data returned by this function, use XFreeDe- viceState. 45 X Input Extension Library X11, Release 6.4 __ | void XFreeDeviceState(state) XDeviceState *state; state Specifies the pointer to the XDeviceState data returned by a previous call to XQueryDeviceState. |__ XFreeDeviceState frees the device state data. 2.2. Events The input extension creates input events analogous to the core input events. These extension input events are gener- ated by manipulating one of the extension input devices. The remainder of this section discusses the following X Input Extension event topics: o Event types o Event classes o Event structures 2.2.1. Event Types Event types are integer numbers that a client can use to determine what kind of event it has received. The client compares the type field of the event structure with known event types to make this determination. The core input event types are constants and are defined in the header file . Extension event types are not constants. Instead, they are dynamically allocated by the extension's request to the X server when the extension is initialized. Because of this, extension event types must be obtained by the client from the server. The client program determines the event type for an exten- sion event by using the information returned by the XOpenDe- vice request. This type can then be used for comparison with the type field of events received by the client. Extension events propagate up the window hierarchy in the same manner as core events. If a window is not interested in an extension event, it usually propagates to the closest ancestor that is interested, unless the dont_propagate list prohibits it. Grabs of extension devices may alter the set of windows that receive a particular extension event. The following table lists the event category and its associ- ated event type or types. 46 X Input Extension Library X11, Release 6.4 ------------------------------------------------------ Event Category Event Type ------------------------------------------------------ Device key DeviceKeyPress DeviceKeyRelease Device motion DeviceButtonPress DeviceButtonRelease DeviceMotionNotify Device input focus DeviceFocusIn DeviceFocusOut Device state notification DeviceStateNotify Device proximity ProximityIn ProximityOut Device mapping DeviceMappingNotify Device change ChangeDeviceNotify ------------------------------------------------------ 2.2.2. Event Classes Event classes are integer numbers that are used in the same way as the core event masks. They are used by a client pro- gram to indicate to the server which events that client pro- gram wishes to receive. The core input event masks are constants and are defined in the header file . Extension event classes are not constants. Instead, they are dynamically allocated by the extension's request to the X server when the extension is initialized. Because of this, extension event classes must be obtained by the client from the server. The event class for an extension event and device is obtained from information returned by the XOpenDevice func- tion. This class can then be used in an XSelectExtension- Event request to ask that events of that type from that device be sent to the client program. For DeviceButtonPress events, the client may specify whether or not an implicit passive grab should be done when the but- ton is pressed. If the client wants to guarantee that it will receive a DeviceButtonRelease event for each DeviceBut- tonPress event it receives, it should specify the DeviceBut- tonPressGrab class in addition to the DeviceButtonPress class. This restricts the client in that only one client at a time may request DeviceButtonPress events from the same device and window if any client specifies this class. If any client has specified the DeviceButtonPressGrab class, any requests by any other client that specify the same device and window and specify either DeviceButtonPress or DeviceButtonPressGrab will cause an Access error to be gen- erated. 47 X Input Extension Library X11, Release 6.4 If only the DeviceButtonPress class is specified, no implicit passive grab will be done when a button is pressed on the device. Multiple clients may use this class to spec- ify the same device and window combination. The client may also select DeviceMotion events only when a button is down. It does this by specifying the event classes DeviceButton1Motion through DeviceButton5Motion. An input device will support only as many button motion classes as it has buttons. 2.2.3. Event Structures Each extension event type has a corresponding structure declared in . All event structures have the following common members: type Set to the event type number that uniquely identi- fies it. For example, when the X server reports a DeviceKeyPress event to a client application, it sends an XDeviceKeyPressEvent structure. serial Set from the serial number reported in the proto- col but expanded from the 16-bit least significant bits to a full 32-bit value. send_event Set to True if the event came from an XSendEvent request. display Set to a pointer to a structure that defines the display on which the event was read. Extension event structures report the current position of the X pointer. In addition, if the device reports motion data and is reporting absolute data, the current value of any valuators the device contains is also reported. 2.2.3.1. Device Key Events Key events from extension devices contain all the informa- tion that is contained in a key event from the X keyboard. In addition, they contain a device ID and report the current value of any valuators on the device, if that device is reporting absolute data. If data for more than six valua- tors is being reported, more than one key event will be sent. The axes_count member contains the number of axes that are being reported. The server sends as many of these events as are needed to report the device data. Each event contains the total number of axes reported in the axes_count member and the first axis reported in the current event in the first_axis member. If the device supports input class Valuators, but is not reporting absolute mode data, the axes_count member contains zero (0). 48 X Input Extension Library X11, Release 6.4 The location reported in the x, y and x_root, y_root members is the location of the core X pointer. The XDeviceKeyEvent structure is defined as follows: __ | typedef struct { int type; /* of event */ unsigned long serial; /* # of last request processed */ Bool send_event; /* true if from SendEvent request */ Display *display; /* Display the event was read from */ Window window; /* "event" window reported relative to */ XID deviceid; Window root; /* root window event occurred on */ Window subwindow; /* child window */ Time time; /* milliseconds */ int x, y; /* x, y coordinates in event window */ int x_root; /* coordinates relative to root */ int y_root; /* coordinates relative to root */ unsigned int state; /* key or button mask */ unsigned int keycode; /* detail */ Bool same_screen; /* same screen flag */ unsigned int device_state;/* device key or button mask */ unsigned char axes_count; unsigned char first_axis; int axis_data[6]; } XDeviceKeyEvent; typedef XDeviceKeyEvent XDeviceKeyPressedEvent; typedef XDeviceKeyEvent XDeviceKeyReleasedEvent; |__ 2.2.3.2. Device Button Events Button events from extension devices contain all the infor- mation that is contained in a button event from the X pointer. In addition, they contain a device ID and report the current value of any valuators on the device if that device is reporting absolute data. If data for more than six valuators is being reported, more than one button event may be sent. The axes_count member contains the number of axes that are being reported. The server sends as many of these events as are needed to report the device data. Each event contains the total number of axes reported in the axes_count member and the first axis reported in the current event in the first_axis member. If the device supports input class Valuators, but is not reporting absolute mode data, the axes_count member contains zero (0). The location reported in the x, y and x_root, y_root members is the location of the core X pointer. 49 X Input Extension Library X11, Release 6.4 __ | typedef struct { int type; /* of event */ unsigned long serial; /* # of last request processed by server */ Bool send_event; /* true if from a SendEvent request */ Display *display; /* Display the event was read from */ Window window; /* "event" window reported relative to */ XID deviceid; Window root; /* root window that the event occurred on */ Window subwindow; /* child window */ Time time; /* milliseconds */ int x, y; /* x, y coordinates in event window */ int x_root; /* coordinates relative to root */ int y_root; /* coordinates relative to root */ unsigned int state; /* key or button mask */ unsigned int button; /* detail */ Bool same_screen; /* same screen flag */ unsigned int device_state;/* device key or button mask */ unsigned char axes_count; unsigned char first_axis; int axis_data[6]; } XDeviceButtonEvent; typedef XDeviceButtonEvent XDeviceButtonPressedEvent; typedef XDeviceButtonEvent XDeviceButtonReleasedEvent; |__ 2.2.3.3. Device Motion Events Motion events from extension devices contain all the infor- mation that is contained in a motion event from the X pointer. In addition, they contain a device ID and report the current value of any valuators on the device. The location reported in the x, y and x_root, y_root members is the location of the core X pointer, and so is 2-dimen- sional. Extension motion devices may report motion data for a vari- able number of axes. The axes_count member contains the number of axes that are being reported. The server sends as many of these events as are needed to report the device data. Each event contains the total number of axes reported in the axes_count member and the first axis reported in the current event in the first_axis member. 50 X Input Extension Library X11, Release 6.4 __ | typedef struct { int type; /* of event */ unsigned long serial; /* # of last request processed by server */ Bool send_event; /* true if from a SendEvent request */ Display *display; /* Display the event was read from */ Window window; /* "event" window reported relative to */ XID deviceid; Window root; /* root window that the event occurred on */ Window subwindow; /* child window */ Time time; /* milliseconds */ int x, y; /* x, y coordinates in event window */ int x_root; /* coordinates relative to root */ int y_root; /* coordinates relative to root */ unsigned int state; /* key or button mask */ char is_hint; /* detail */ Bool same_screen; /* same screen flag */ unsigned int device_state;/* device key or button mask */ unsigned char axes_count; unsigned char first_axis; int axis_data[6]; } XDeviceMotionEvent; |__ 2.2.3.4. Device Focus Events These events are equivalent to the core focus events. They contain the same information, with the addition of a device ID to identify which device has had a focus change, and a timestamp. DeviceFocusIn and DeviceFocusOut events are generated for focus changes of extension devices in the same manner as core focus events are generated. 51 X Input Extension Library X11, Release 6.4 __ | typedef struct { int type; /* of event */ unsigned long serial;/* # of last request processed by server */ Bool send_event; /* true if this came from a SendEvent request */ Display *display; /* Display the event was read from */ Window window; /* "event" window it is reported relative to */ XID deviceid; int mode; /* NotifyNormal, NotifyGrab, NotifyUngrab */ int detail; /* * NotifyAncestor, NotifyVirtual, NotifyInferior, * NotifyNonLinear,NotifyNonLinearVirtual, NotifyPointer, * NotifyPointerRoot, NotifyDetailNone */ Time time; } XDeviceFocusChangeEvent; typedef XDeviceFocusChangeEvent XDeviceFocusInEvent; typedef XDeviceFocusChangeEvent XDeviceFocusOutEvent; |__ 2.2.3.5. Device StateNotify Event This event is analogous to the core keymap event but reports the current state of the device for each input class that it supports. It is generated after every DeviceFocusIn event and EnterNotify event and is delivered to clients who have selected XDeviceStateNotify events. If the device supports input class Valuators, the mode mem- ber in the XValuatorStatus structure is a bitmask that reports the device mode, proximity state, and other state information. The following bits are currently defined: 0x01 Relative = 0, Absolute = 1 0x02 InProximity = 0, OutOfProximity = 1 If the device supports more valuators than can be reported in a single XEvent, multiple XDeviceStateNotify events will be generated. 52 X Input Extension Library X11, Release 6.4 __ | typedef struct { unsigned char class; unsigned char length; } XInputClass; typedef struct { int type; unsigned long serial; /* # of last request processed by server */ Bool send_event; /* true if this came from a SendEvent request */ Display *display; /* Display the event was read from */ Window window; XID deviceid; Time time; int num_classes; char data[64]; } XDeviceStateNotifyEvent; typedef struct { unsigned char class; unsigned char length; unsigned char num_valuators; unsigned char mode; int valuators[6]; } XValuatorStatus; typedef struct { unsigned char class; unsigned char length; short num_keys; char keys[32]; } XKeyStatus; typedef struct { unsigned char class; unsigned char length; short num_buttons; char buttons[32]; } XButtonStatus; |__ 2.2.3.6. Device Mapping Event This event is equivalent to the core MappingNotify event. It notifies client programs when the mapping of keys, modi- fiers, or buttons on an extension device has changed. 53 X Input Extension Library X11, Release 6.4 __ | typedef struct { int type; unsigned long serial; Bool send_event; Display *display; Window window; XID deviceid; Time time; int request; int first_keycode; int count; } XDeviceMappingEvent; |__ 2.2.3.7. ChangeDeviceNotify Event This event has no equivalent in the core protocol. It noti- fies client programs when one of the core devices has been changed. __ | typedef struct { int type; unsigned long serial; Bool send_event; Display *display; Window window; XID deviceid; Time time; int request; } XChangeDeviceNotifyEvent; |__ 2.2.3.8. Proximity Events These events have no equivalent in the core protocol. Some input devices such as graphics tablets or touchscreens may send these events to indicate that a stylus has moved into or out of contact with a positional sensing surface. The event contains the current value of any valuators on the device if that device is reporting absolute data. If data for more than six valuators is being reported, more than one proximity event may be sent. The axes_count member contains the number of axes that are being reported. The server sends as many of these events as are needed to report the device data. Each event contains the total number of axes reported in the axes_count member and the first axis reported in the current event in the first_axis member. If the device supports input class Valuators, but is not 54 X Input Extension Library X11, Release 6.4 reporting absolute mode data, the axes_count member contains zero (0). __ | typedef struct { int type; /* ProximityIn or ProximityOut */ unsigned long serial; /* # of last request processed by server */ Bool send_event; /* true if this came from a SendEvent request */ Display *display; /* Display the event was read from */ Window window; XID deviceid; Window root; Window subwindow; Time time; int x, y; int x_root, y_root; unsigned int state; Bool same_screen; unsigned int device_state;/* device key or button mask */ unsigned char axes_count; unsigned char first_axis; int axis_data[6]; } XProximityNotifyEvent; typedef XProximityNotifyEvent XProximityInEvent; typedef XProximityNotifyEvent XProximityOutEvent; |__ 2.3. Event Handling Functions This section discusses the X Input Extension event handling functions that allow you to: o Determine the extension version o List the available devices o Enable and disable extension devices o Change the mode of a device o Initialize valuators on an input device o Get input device controls o Change input device controls o Select extension device events o Determine selected device events 55 X Input Extension Library X11, Release 6.4 o Control event propogation o Send an event o Get motion history 2.3.1. Determining the Extension Version __ | XExtensionVersion * XGetExtensionVersion(display, name) Display *display; char *name; display Specifies the connection to the X server. name Specifies the name of the desired extension. |__ XGetExtensionVersion allows a client to determine whether a server supports the desired version of the input extension. The XExtensionVersion structure returns information about the version of the extension supported by the server and is defined as follows: __ | typedef struct { Bool present; short major_version; short minor_version; } XExtensionVersion; |__ The major and minor versions can be compared with constants defined in the header file . Each ver- sion is a superset of the previous versions. You should use XFree to free the data returned by this func- tion. 2.3.2. Listing Available Devices A client program that wishes to access a specific device must first determine whether that device is connected to the X server. This is done through the XListInputDevices func- tion, which will return a list of all devices that can be opened by the X server. The client program can use one of the names defined in the header file in an XInternAtom request to determine the device type of the desired device. This type can then be compared with the 56 X Input Extension Library X11, Release 6.4 device types returned by the XListInputDevices request. __ | XDeviceInfo * XListInputDevices(display, ndevices) Display *display; int *ndevices; /* RETURN */ display Specifies the connection to the X server. ndevices Specifies the address of a variable into which the server can return the number of input devices available to the X server. |__ XListInputDevices allows a client to determine which devices are available for X input and information about those devices. An array of XDeviceInfo structures is returned, with one element in the array for each device. The number of devices is returned in the ndevices argument. The X pointer device and X keyboard device are reported, as well as all available extension input devices. The use mem- ber of the XDeviceInfo structure specifies the current use of the device. If the value of this member is IsXPointer, the device is the X pointer device. If the value is IsXKey- board, the device is the X keyboard device. If the value is IsXExtensionDevice, the device is available for use as an extension input device. Each XDeviceInfo entry contains a pointer to a list of structures that describe the characteristics of each class of input supported by that device. The num_classes member contains the number of entries in that list. If the device supports input class Valuators, one of the structures pointed to by the XDeviceInfo structure will be an XValuatorInfo structure. The axes member of that struc- ture contains the address of an array of XAxisInfo struc- tures. There is one element in this array for each axis of motion reported by the device. The number of elements in this array is contained in the num_axes element of the XVal- uatorInfo structure. The size of the motion buffer for the device is reported in the motion_buffer member of the XValu- atorInfo structure. The XDeviceInfo structure is defined as follows: 57 X Input Extension Library X11, Release 6.4 __ | typedef struct _XDeviceInfo { XID id; Atom type; char *name; int num_classes; int use; XAnyClassPtr inputclassinfo; } XDeviceInfo; |__ The structures pointed to by the XDeviceInfo structure are defined as follows: __ | typedef struct _XKeyInfo { XID class; int length; unsigned short min_keycode; unsigned short max_keycode; unsigned short num_keys; } XKeyInfo; typedef struct _XButtonInfo { XID class; int length; short num_buttons; } XButtonInfo; typedef struct _XValuatorInfo { XID class; int length; unsigned char num_axes; unsigned char mode; unsigned long motion_buffer; XAxisInfoPtr axes; } XValuatorInfo; |__ The XAxisInfo structure pointed to by the XValuatorInfo structure is defined as follows: 58 X Input Extension Library X11, Release 6.4 __ | typedef struct _XAxisInfo { int resolution; int min_value; int max_value; } XAxisInfo; |__ The following atom names are defined in the header file. MOUSE QUADRATURE TABLET SPACEBALL KEYBOARD DATAGLOVE TOUCHSCREEN EYETRACKER TOUCHPAD CURSORKEYS BUTTONBOX FOOTMOUSE BARCODE ID_MODULE KNOB_BOX ONE_KNOB TRACKBALL NINE_KNOB These names can be used in an XInternAtom request to return an atom that can be used for comparison with the type member of the XDeviceInfo structure. XListInputDevices returns NULL if there are no input devices to list. To free the data returned by XListInputDevices, use XFreeDe- viceList. __ | void XFreeDeviceList(list) XDeviceInfo *list; list Specifies the pointer to the XDeviceInfo array returned by a previous call to XListInputDevices. |__ XFreeDeviceList frees the list of input device information. 2.3.3. Enabling and Disabling Extension Devices Each client program that wishes to access an extension device must request that the server open that device by calling the XOpenDevice function. 59 X Input Extension Library X11, Release 6.4 __ | XDevice * XOpenDevice(display, device_id) Display *display; XID device_id; display Specifies the connection to the X server. device_id Specifies the ID that uniquely identifies the device to be opened. This ID is obtained from the XListInputDevices request. |__ XOpenDevice opens the device for the requesting client and, on success, returns an XDevice structure, which is defined as follows: __ | typedef struct { XID device_id; int num_classes; XInputClassInfo *classes; } XDevice; |__ The XDevice structure contains a pointer to an array of XIn- putClassInfo structures. Each element in that array con- tains information about events of a particular input class supported by the input device. The XInputClassInfo structure is defined as follows: __ | typedef struct { unsigned char input_class; unsigned char event_type_base; } XInputClassInfo; |__ A client program can determine the event type and event class for a given event by using macros defined by the input extension. The name of the macro corresponds to the desired event, and the macro is passed the structure that describes the device from which input is desired, for example: DeviceKeyPress(XDevice *device, event_type, event_class) 60 X Input Extension Library X11, Release 6.4 The macro will fill in the values of the event class to be used in an XSelectExtensionEvent request to select the event and the event type to be used in comparing with the event types of events received via XNextEvent. XOpenDevice can generate BadDevice errors. Before terminating, the client program should request that the server close the device by calling the XCloseDevice function. __ | int XCloseDevice(display, device) Display *display; XDevice *device; display Specifies the connection to the X server. device Specifies the device to be closed. |__ XCloseDevice closes the device for the requesting client and frees the associated XDevice structure. A client may open the same extension device more than once. Requests after the first successful one return an additional XDevice structure with the same information as the first, but otherwise have no effect. A single XCloseDevice request will terminate that client's access to the device. Closing a device releases any active or passive grabs the requesting client has established. If the device is frozen only by an active grab of the requesting client, any queued events are released. If a client program terminates without closing a device, the server will automatically close that device on behalf of the client. This does not affect any other clients that may be accessing that device. XCloseDevice can generate BadDevice errors. 2.3.4. Changing the Mode of a Device Some devices are capable of reporting either relative or absolute motion data. To change the mode of a device from relative to absolute, use XSetDeviceMode. 61 X Input Extension Library X11, Release 6.4 __ | int XSetDeviceMode(display, device, mode) Display *display; XDevice *device; int mode; display Specifies the connection to the X server. device Specifies the device whose mode should be changed. mode Specifies the mode. You can pass Absolute or Rel- ative. |__ XSetDeviceMode allows a client to request the server to change the mode of a device that is capable of reporting either absolute positional data or relative motion data. If the device is invalid or if the client has not previously requested that the server open the device via an XOpenDevice request, this request will fail with a BadDevice error. If the device does not support input class Valuators or if it is not capable of reporting the specified mode, the request will fail with a BadMatch error. This request will fail and return DeviceBusy if another client has already opened the device and requested a differ- ent mode. XSetDeviceMode can generate BadDevice, BadMatch, BadMode, and DeviceBusy errors. 2.3.5. Initializing Valuators on an Input Device Some devices that report absolute positional data can be initialized to a starting value. Devices that are capable of reporting relative motion or absolute positional data may require that their valuators be initialized to a starting value after the mode of the device is changed to Absolute. To initialize the valuators on such a device, use XSetDe- viceValuators. 62 X Input Extension Library X11, Release 6.4 __ | Status XSetDeviceValuators(display, device, valuators, first_valuator, num_valuators) Display *display; XDevice *device; int *valuators, first_valuator, num_valuators; display Specifies the connection to the X server. device Specifies the device whose valuators should be initialized. valuators Specifies the values to which each valuator should be set. first_valuator Specifies the first valuator to be set. num_valuators Specifies the number of valuators to be set. |__ XSetDeviceValuators initializes the specified valuators on the specified extension input device. Valuators are num- bered beginning with zero. Only the valuators in the range specified by first_valuator and num_valuators are set. A BadValue error results if the number of valuators supported by the device is less than the following expression: first_valuator + num_valuators If the request succeeds, Success is returned. If the speci- fied device is grabbed by some other client, the request will fail and a status of AlreadyGrabbed will be returned. XSetDeviceValuators can generate BadDevice, BadLength, Bad- Match, and BadValue errors. 2.3.6. Getting Input Device Controls Some input devices support various configuration controls that can be queried or changed by clients. The set of sup- ported controls will vary from one input device to another. Requests to manipulate these controls will fail if either the target X server or the target input device does not sup- port the requested device control. Each device control has a unique identifier. Information passed with each device control varies in length and is mapped by data structures unique to that device control. 63 X Input Extension Library X11, Release 6.4 To query a device control, use XGetDeviceControl. __ | XDeviceControl * XGetDeviceControl(display, device, control) Display *display; XDevice *device; int control; display Specifies the connection to the X server. device Specifies the device whose configuration control status is to be returned. control Identifies the specific device control to be queried. |__ XGetDeviceControl returns the current state of the specified device control. If the target X server does not support that device control, a BadValue error is returned. If the specified device does not support that device control, a BadMatch error is returned. If the request is successful, a pointer to a generic XDe- viceState structure is returned. The information returned varies according to the specified control and is mapped by a structure appropriate for that control. The first two mem- bers are common to all device controls and are defined as follows: __ | typedef struct { XID control; int length; } XDeviceState; |__ The control may be compared to constants defined in the file . Currently defined device controls include DEVICE_RESOLUTION. The information returned for the DEVICE_RESOLUTION control is defined in the XDeviceResolutionState structure, which is defined as follows: 64 X Input Extension Library X11, Release 6.4 __ | typedef struct { XID control; int length; int num_valuators; int *resolutions; int *min_resolutions; int *max_resolutions; } XDeviceResolutionState; |__ This device control returns a list of valuators and the range of valid resolutions allowed for each. Valuators are numbered beginning with zero (0). Resolutions for all valu- ators on the device are returned. For each valuator i on the device, resolutions[i] returns the current setting of the resolution, min_resolutions[i] returns the minimum valid setting, and max_resolutions[i] returns the maximum valid setting. When this control is specified, XGetDeviceControl fails with a BadMatch error if the specified device has no valuators. XGetDeviceControl can generate BadMatch and BadValue errors. 2.3.7. Changing Input Device Controls Some input devices support various configuration controls that can be changed by clients. Typically, this would be done to initialize the device to a known state or configura- tion. The set of supported controls will vary from one input device to another. Requests to manipulate these con- trols will fail if either the target X server or the target input device does not support the requested device control. Setting the device control will also fail if the target input device is grabbed by another client or is open by another client and has been set to a conflicting state. Each device control has a unique identifier. Information passed with each device control varies in length and is mapped by data structures unique to that device control. To change a device control, use XChangeDeviceControl. 65 X Input Extension Library X11, Release 6.4 __ | Status XChangeDeviceControl(display, device, control, value) Display *display; XDevice *device; int control; XDeviceControl *value; display Specifies the connection to the X server. device Specifies the device whose configuration control status is to be modified. control Identifies the specific device control to be changed. value Specifies a pointer to an XDeviceControl structure that describes which control is to be changed and how it is to be changed. |__ XChangeDeviceControl changes the current state of the speci- fied device control. If the target X server does not sup- port that device control, a BadValue error is returned. If the specified device does not support that device control, a BadMatch error is returned. If another client has the tar- get device grabbed, a status of AlreadyGrabbed is returned. If another client has the device open and has set it to a conflicting state, a status of DeviceBusy is returned. If the request fails for any reason, the device control will not be changed. If the request is successful, the device control will be changed and a status of Success is returned. The informa- tion passed varies according to the specified control and is mapped by a structure appropriate for that control. The first two members are common to all device controls: __ | typedef struct { XID control; int length; } XDeviceControl; |__ The control may be set using constants defined in the header file. Currently defined device controls include DEVICE_RESOLUTION. The information that can be changed by the DEVICE_RESOLUTION control is defined in the XDeviceResolutionControl struc- ture, which is defined as follows: 66 X Input Extension Library X11, Release 6.4 __ | typedef struct { XID control; int length; int first_valuator; int num_valuators; int *resolutions; } XDeviceResolutionControl; |__ This device control changes the resolution of the specified valuators on the specified extension input device. Valua- tors are numbered beginning with zero. Only the valuators in the range specified by first_valuator and num_valuators are set. A value of -1 in the resolutions list indicates that the resolution for this valuator is not to be changed. The num_valuators member specifies the number of valuators in the resolutions list. When this control is specified, XChangeDeviceControl fails with a BadMatch error if the specified device has no valua- tors. If a resolution is specified that is not within the range of valid values (as returned by XGetDeviceControl), XChangeDeviceControl fails with a BadValue error. A Bad- Value error results if the number of valuators supported by the device is less than the following expression: first_valuator + num_valuators, XChangeDeviceControl can generate BadMatch and BadValue errors. 2.3.8. Selecting Extension Device Events To select device input events, use XSelectExtensionEvent. The parameters passed are a pointer to a list of classes that define the desired event types and devices, a count of the number of elements in the list, and the ID of the window from which events are desired. 67 X Input Extension Library X11, Release 6.4 __ | int XSelectExtensionEvent(display, window, event_list, event_count) Display *display; Window window; XEventClass *event_list; int event_count; display Specifies the connection to the X server. window Specifies the ID of the window from which the client wishes to receive events. event_list Specifies a pointer to an array of event classes that specify which events are desired. event_count Specifies the number of elements in the event_list. |__ XSelectExtensionEvent requests the server to send events that match the events and devices described by the event list and that come from the requested window. The elements of the XEventClass array are the event_class values obtained by invoking a macro with the pointer to an XDevice structure returned by the XOpenDevice request. For example, the DeviceKeyPress macro would return the XEventClass for DeviceKeyPress events from the specified device if it were invoked in the following form: DeviceKeyPress (XDevice *device, event_type, event_class) Macros are defined for the following event classes: 68 X Input Extension Library X11, Release 6.4 DeviceKeyPress DeviceKeyRelease DeviceButtonPress DeviceButtonRelease DeviceMotionNotify DeviceFocusIn DeviceFocusOut ProximityIn ProximityOut DeviceStateNotify DeviceMappingNotify ChangeDeviceNotify DevicePointerMotionHint DeviceButton1Motion DeviceButton2Motion DeviceButton3Motion, DeviceButton4Motion DeviceButton5Motion DeviceButtonMotion, DeviceOwnerGrabButton DeviceButtonPressGrab To get the next available event from within a client pro- gram, use the core XNextEvent function. This returns the next event whether it came from a core device or an exten- sion device. Succeeding XSelectExtensionEvent requests using event classes for the same device as was specified on a previous request will replace the previous set of selected events from that device with the new set. XSelectExtensionEvent can generate BadAccess, BadClass, BadLength, and BadWindow errors. 2.3.9. Determining Selected Device Events To determine which extension events are currently selected from a given window, use XGetSelectedExtensionEvents. 69 X Input Extension Library X11, Release 6.4 __ | int XGetSelectedExtensionEvents(display, window, this_client_count, this_client, all_clients_count, all_clients) Display *display; Window window; int *this_client_count; /* RETURN */ XEventClass **this_client; /* RETURN */ int *all_clients_count; /* RETURN */ XEventClass **all_clients; /* RETURN */ display Specifies the connection to the X server. window Specifies the ID of the window from which the client wishes to receive events. this_client_count Returns the number of elements in the this_client list. this_client Returns a list of XEventClasses that specify which events are selected by this client. all_clients_count Returns the number of elements in the all_clients list. all_clients Returns a list of XEventClasses that specify which events are selected by all clients. |__ XGetSelectedExtensionEvents returns pointers to two event class arrays. One lists the extension events selected by this client from the specified window. The other lists the extension events selected by all clients from the specified window. This information is analogous to that returned in your_event_mask and all_event_masks of the XWindowAttributes structure when an XGetWindowAttributes request is made. To free the two arrays returned by this function, use XFree. XGetSelectedExtensionEvents can generate BadWindow errors. 2.3.10. Controlling Event Propagation Extension events propagate up the window hierarchy in the same manner as core events. If a window is not interested in an extension event, it usually propagates to the closest ancestor that is interested, unless the dont_propagate list prohibits it. Grabs of extension devices may alter the set of windows that receive a particular extension event. 70 X Input Extension Library X11, Release 6.4 Client programs may control event propagation through the use of the following two functions: XChangeDeviceDontPropa- gateList and XGetDeviceDontPropagateList. __ | int XChangeDeviceDontPropagateList(display, window, event_count, events, mode) Display *display; Window window; int event_count; XEventClass *events; int mode; display Specifies the connection to the X server. window Specifies the desired window. event_count Specifies the number of elements in the events list. events Specifies a pointer to the list of XEventClasses. mode Specifies the mode. You can pass AddToList or DeleteFromList. |__ XChangeDeviceDontPropagateList adds an event to or deletes an event from the do_not_propagate list of extension events for the specified window. There is one list per window, and the list remains for the life of the window. The list is not altered if a client that changed the list terminates. Suppression of event propagation is not allowed for all events. If a specified XEventClass is invalid because sup- pression of that event is not allowed, a BadClass error results. XChangeDeviceDontPropagateList can generate BadClass, Bad- Mode, and BadWindow errors. 71 X Input Extension Library X11, Release 6.4 __ | XEventClass * XGetDeviceDontPropagateList(display, window, event_count) Display *display; Window window; int *event_count; /*RETURN */ display Specifies the connection to the X server. window Specifies the desired window. event_count Returns the number of elements in the array returned by this function. |__ XGetDeviceDontPropagateList allows a client to determine the do_not_propagate list of extension events for the specified window. It returns an array of XEventClass, each XEvent- Class representing a device/event type pair. To free the data returned by this function, use XFree. XGetDeviceDontPropagateList can generate BadWindow errors. 2.3.11. Sending an Event To send an extension event to another client, use XSendEx- tensionEvent. 72 X Input Extension Library X11, Release 6.4 __ | int XSendExtensionEvent(display, device, window, propagate, event_count, event_list, event) Display *display; XDevice *device; Window window; Bool propagate; int event_count; XEventClass *event_list; XEvent *event; display Specifies the connection to the X server. device Specifies the device whose ID is recorded in the event. window Specifies the destination window ID. You can pass a window ID, PointerWindow or InputFocus. propagate Specifies a boolean value that is either True or False. event_count Specifies the number of elements in the event_list array. event_list Specifies a pointer to an array of XEventClass. event Specifies a pointer to the event that is to be sent. |__ XSendExtensionEvent identifies the destination window, determines which clients should receive the specified event, and ignores any active grabs. It requires a list of XEvent- Class to be specified. These are obtained by opening an input device with the XOpenDevice request. XSendExtensionEvent uses the window argument to identify the destination window as follows: o If you pass PointerWindow, the destination window is the window that contains the pointer. o If you pass InputFocus and if the focus window contains the pointer, the destination window is the window that contains the pointer. If the focus window does not contain the pointer, the destination window is the focus window. To determine which clients should receive the specified events, XSendExtensionEvent uses the propagate argument as follows: 73 X Input Extension Library X11, Release 6.4 o If propagate is False, the event is sent to every client selecting from the destination window any of the events specified in the event_list array. o If propagate is True and no clients have selected from the destination window any of the events specified in the event_list array, the destination is replaced with the closest ancestor of destination for which some client has selected one of the specified events and for which no intervening window has that event in its do_not_propagate mask. If no such window exists, or if the window is an ancestor of the focus window, and InputFocus was originally specified as the destination, the event is not sent to any clients. Otherwise, the event is reported to every client selecting on the final destination any of the events specified in event_list. The event in the XEvent structure must be one of the events defined by the input extension, so that the X server can correctly byte swap the contents as necessary. The contents of the event are otherwise unaltered and unchecked by the X server except to force send_event to True in the forwarded event and to set the sequence number in the event correctly. XSendExtensionEvent returns zero if the conversion-to-wire protocol failed; otherwise, it returns nonzero. XSendExtensionEvent can generate BadClass, BadDevice, Bad- Value, and BadWindow errors. 2.3.12. Getting Motion History 74 X Input Extension Library X11, Release 6.4 __ | XDeviceTimeCoord * XGetDeviceMotionEvents(display, device, start, stop, nevents_return, mode_return, axis_count_return); Display *display; XDevice *device; Time start, stop; int *nevents_return; int *mode_return; int *axis_count_return; display Specifies the connection to the X server. device Specifies the desired device. start Specifies the start time. stop Specifies the stop time. nevents_return Returns the number of positions in the motion buffer returned for this request. mode_return Returns the mode of the nevents information. The mode will be one of the following: Absolute or Relative. axis_count_return Returns the number of axes reported in each of the positions returned. |__ XGetDeviceMotionEvents returns all positions in the device's motion history buffer that fall between the specified start and stop times inclusive. If the start time is in the future or is later than the stop time, no positions are returned. The return type for this function is an XDeviceTimeCoord structure, which is defined as follows: __ | typedef struct { Time time; unsigned int *data; } XDeviceTimeCoord; |__ The data member is a pointer to an array of data items. Each item is of type int, and there is one data item per axis of motion reported by the device. The number of axes 75 X Input Extension Library X11, Release 6.4 reported by the device is returned in the axis_count vari- able. The value of the data items depends on the mode of the device. The mode is returned in the mode variable. If the mode is Absolute, the data items are the raw values gener- ated by the device. These may be scaled by the client pro- gram using the maximum values that the device can generate for each axis of motion that it reports. The maximum value for each axis is reported in the max_val member of the XAx- isInfo structure, which is part of the information returned by the XListInputDevices request. If the mode is Relative, the data items are the relative values generated by the device. The client program must choose an initial position for the device and maintain a current position by accumulating these relative values. Consecutive calls to XGetDeviceMotionEvents can return data of different modes, that is, if some client program has changed the mode of the device via an XSetDeviceMode request. XGetDeviceMotionEvents can generate BadDevice and BadMatch errors. To free the data returned by XGetDeviceMotionEvents, use XFreeDeviceMotionEvents. __ | void XFreeDeviceMotionEvents(events) XDeviceTimeCoord *events; events Specifies the pointer to the XDeviceTimeCoord array returned by a previous call to XGetDeviceMo- tionEvents. |__ XFreeDeviceMotionEvents frees the specified array of motion information. 76 X Input Extension Library X11, Release 6.4 Appendix A The following information is contained in the and header files: 77 X Input Extension Library X11, Release 6.4 /************************************************************ Copyright 1989, 1998 The Open Group Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation. The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of The Open Group shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization from The Open Group. Copyright 1989 by Hewlett-Packard Company, Palo Alto, California. All Rights Reserved Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of Hewlett-Packard not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. HEWLETT-PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL HEWLETT-PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ********************************************************/ /* $XFree86: xc/doc/specs/Xi/library.ms,v 1.3 2006/01/09 14:56:34 dawes Exp $ */ /* Definitions used by the library and client */ #ifndef _XINPUT_H_ #define _XINPUT_H_ #include #include 78 X Input Extension Library X11, Release 6.4 #define _deviceKeyPress 0 #define _deviceKeyRelease 1 #define _deviceButtonPress 0 #define _deviceButtonRelease 1 #define _deviceMotionNotify 0 #define _deviceFocusIn 0 #define _deviceFocusOut 1 #define _proximityIn 0 #define _proximityOut 1 #define _deviceStateNotify 0 #define _deviceMappingNotify 1 #define _changeDeviceNotify 2 #define FindTypeAndClass(d,type,_class,classid,offset) { int _i; XInputClassInfo *_ip; type = 0; _class = 0; for (_i=0, _ip= ((XDevice *) d)->classes; _i< ((XDevice *) d)->num_classes; _i++, _ip++) if (_ip->input_class == classid) {type = _ip->event_type_base + offset; _class = ((XDevice *) d)->device_id << 8 | type;}} #define DeviceKeyPress(d,type,_class) FindTypeAndClass(d, type, _class, KeyClass, _deviceKeyPress) #define DeviceKeyRelease(d,type,_class) FindTypeAndClass(d, type, _class, KeyClass, _deviceKeyRelease) #define DeviceButtonPress(d,type,_class) FindTypeAndClass(d, type, _class, ButtonClass, _deviceButtonPress) #define DeviceButtonRelease(d,type,_class) FindTypeAndClass(d, type, _class, ButtonClass, _deviceButtonRelease) #define DeviceMotionNotify(d,type,_class) FindTypeAndClass(d, type, _class, ValuatorClass, _deviceMotionNotify) #define DeviceFocusIn(d,type,_class) FindTypeAndClass(d, type, _class, FocusClass, _deviceFocusIn) #define DeviceFocusOut(d,type,_class) FindTypeAndClass(d, type, _class, FocusClass, _deviceFocusOut) #define ProximityIn(d,type,_class) FindTypeAndClass(d, type, _class, ProximityClass, _proximityIn) #define ProximityOut(d,type,_class) FindTypeAndClass(d, type, _class, ProximityClass, _proximityOut) #define DeviceStateNotify(d,type,_class) FindTypeAndClass(d, type, _class, OtherClass, _deviceStateNotify) #define DeviceMappingNotify(d,type,_class) FindTypeAndClass(d, type, _class, OtherClass, _deviceMappingNotify) #define ChangeDeviceNotify(d,type,_class) FindTypeAndClass(d, type, _class, OtherClass, _changeDeviceNotify) #define DevicePointerMotionHint(d,type,_class) { _class = ((XDevice *) d)->device_id << 8 | _devicePointerMotionHint;} #define DeviceButton1Motion(d,type,_class) { _class = ((XDevice *) d)->device_id << 8 | _deviceButton1Motion;} #define DeviceButton2Motion(d,type,_class) { _class = ((XDevice *) d)->device_id << 8 | _deviceButton2Motion;} #define DeviceButton3Motion(d,type,_class) { _class = ((XDevice *) d)->device_id << 8 | _deviceButton3Motion;} #define DeviceButton4Motion(d,type, _class) { _class = ((XDevice *) d)->device_id << 8 | _deviceButton4Motion;} 79 X Input Extension Library X11, Release 6.4 #define DeviceButton5Motion(d,type,_class) { _class = ((XDevice *) d)->device_id << 8 | _deviceButton5Motion;} #define DeviceButtonMotion(d,type, _class) { _class = ((XDevice *) d)->device_id << 8 | _deviceButtonMotion;} #define DeviceOwnerGrabButton(d,type,_class) { _class = ((XDevice *) d)->device_id << 8 | _deviceOwnerGrabButton;} #define DeviceButtonPressGrab(d,type,_class) { _class = ((XDevice *) d)->device_id << 8 | _deviceButtonGrab;} #define NoExtensionEvent(d,type,_class) { _class = ((XDevice *) d)->device_id << 8 | _noExtensionEvent;} #define BadDevice(dpy,error) _xibaddevice(dpy, &error) #define BadClass(dpy,error) _xibadclass(dpy, &error) #define BadEvent(dpy,error) _xibadevent(dpy, &error) #define BadMode(dpy,error) _xibadmode(dpy, &error) #define DeviceBusy(dpy,error) _xidevicebusy(dpy, &error) /*************************************************************** * * DeviceKey events. These events are sent by input devices that * support input class Keys. * The location of the X pointer is reported in the coordinate * fields of the x,y and x_root,y_root fields. * */ typedef struct { int type; /* of event */ unsigned long serial; /* # of last request processed */ Bool send_event; /* true if from SendEvent request */ Display *display; /* Display the event was read from */ Window window; /* "event" window reported relative to */ XID deviceid; Window root; /* root window event occured on */ Window subwindow; /* child window */ Time time; /* milliseconds */ int x, y; /* x, y coordinates in event window */ int x_root; /* coordinates relative to root */ int y_root; /* coordinates relative to root */ unsigned int state; /* key or button mask */ unsigned int keycode; /* detail */ Bool same_screen; /* same screen flag */ unsigned int device_state; /* device key or button mask */ unsigned char axes_count; unsigned char first_axis; int axis_data[6]; } XDeviceKeyEvent; typedef XDeviceKeyEvent XDeviceKeyPressedEvent; typedef XDeviceKeyEvent XDeviceKeyReleasedEvent; 80 X Input Extension Library X11, Release 6.4 /******************************************************************* * * DeviceButton events. These events are sent by extension devices * that support input class Buttons. * */ typedef struct { int type; /* of event */ unsigned long serial; /* # of last request processed by server */ Bool send_event; /* true if from a SendEvent request */ Display *display; /* Display the event was read from */ Window window; /* "event" window reported relative to */ XID deviceid; Window root; /* root window that the event occured on */ Window subwindow; /* child window */ Time time; /* milliseconds */ int x, y; /* x, y coordinates in event window */ int x_root; /* coordinates relative to root */ int y_root; /* coordinates relative to root */ unsigned int state; /* key or button mask */ unsigned int button; /* detail */ Bool same_screen; /* same screen flag */ unsigned int device_state; /* device key or button mask */ unsigned char axes_count; unsigned char first_axis; int axis_data[6]; } XDeviceButtonEvent; typedef XDeviceButtonEvent XDeviceButtonPressedEvent; typedef XDeviceButtonEvent XDeviceButtonReleasedEvent; /******************************************************************* * * DeviceMotionNotify event. These events are sent by extension devices * that support input class Valuators. * */ typedef struct { int type; /* of event */ unsigned long serial; /* # of last request processed by server */ Bool send_event; /* true if from a SendEvent request */ Display *display; /* Display the event was read from */ Window window; /* "event" window reported relative to */ XID deviceid; Window root; /* root window that the event occured on */ Window subwindow; /* child window */ Time time; /* milliseconds */ int x, y; /* x, y coordinates in event window */ int x_root; /* coordinates relative to root */ int y_root; /* coordinates relative to root */ unsigned int state; /* key or button mask */ 81 X Input Extension Library X11, Release 6.4 char is_hint; /* detail */ Bool same_screen; /* same screen flag */ unsigned int device_state; /* device key or button mask */ unsigned char axes_count; unsigned char first_axis; int axis_data[6]; } XDeviceMotionEvent; /******************************************************************* * * DeviceFocusChange events. These events are sent when the focus * of an extension device that can be focused is changed. * */ typedef struct { int type; /* of event */ unsigned long serial; /* # of last request processed by server */ Bool send_event; /* true if from a SendEvent request */ Display *display; /* Display the event was read from */ Window window; /* "event" window reported relative to */ XID deviceid; int mode; /* NotifyNormal, NotifyGrab, NotifyUngrab */ int detail; /* * NotifyAncestor, NotifyVirtual, NotifyInferior, * NotifyNonLinear,NotifyNonLinearVirtual, NotifyPointer, * NotifyPointerRoot, NotifyDetailNone */ Time time; } XDeviceFocusChangeEvent; typedef XDeviceFocusChangeEvent XDeviceFocusInEvent; typedef XDeviceFocusChangeEvent XDeviceFocusOutEvent; /******************************************************************* * * ProximityNotify events. These events are sent by those absolute * positioning devices that are capable of generating proximity information. * */ typedef struct { int type; /* ProximityIn or ProximityOut */ unsigned long serial; /* # of last request processed by server */ Bool send_event; /* true if this came from a SendEvent request */ Display *display; /* Display the event was read from */ Window window; XID deviceid; Window root; Window subwindow; Time time; 82 X Input Extension Library X11, Release 6.4 int x, y; int x_root, y_root; unsigned int state; Bool same_screen; unsigned int device_state; /* device key or button mask */ unsigned char axes_count; unsigned char first_axis; int axis_data[6]; } XProximityNotifyEvent; typedef XProximityNotifyEvent XProximityInEvent; typedef XProximityNotifyEvent XProximityOutEvent; /******************************************************************* * * DeviceStateNotify events are generated on EnterWindow and FocusIn * for those clients who have selected DeviceState. * */ typedef struct { #if defined(__cplusplus) || defined(c_plusplus) unsigned char c_class; #else unsigned char class; #endif unsigned char length; } XInputClass; typedef struct { int type; unsigned long serial; /* # of last request processed by server */ Bool send_event; /* true if this came from a SendEvent request */ Display *display; /* Display the event was read from */ Window window; XID deviceid; Time time; int num_classes; char data[64]; } XDeviceStateNotifyEvent; typedef struct { #if defined(__cplusplus) || defined(c_plusplus) unsigned char c_class; #else unsigned char class; #endif unsigned char length; unsigned char num_valuators; unsigned char mode; int valuators[6]; } XValuatorStatus; typedef struct { 83 X Input Extension Library X11, Release 6.4 #if defined(__cplusplus) || defined(c_plusplus) unsigned char c_class; #else unsigned char class; #endif unsigned char length; short num_keys; char keys[32]; } XKeyStatus; typedef struct { #if defined(__cplusplus) || defined(c_plusplus) unsigned char c_class; #else unsigned char class; #endif unsigned char length; short num_buttons; char buttons[32]; } XButtonStatus; /******************************************************************* * * DeviceMappingNotify event. This event is sent when the key mapping, * modifier mapping, or button mapping of an extension device is changed. * */ typedef struct { int type; unsigned long serial; /* # of last request processed by server */ Bool send_event; /* true if this came from a SendEvent request */ Display *display; /* Display the event was read from */ Window window; /* unused */ XID deviceid; Time time; int request; /* one of MappingModifier, MappingKeyboard, MappingPointer */ int first_keycode;/* first keycode */ int count; /* defines range of change w. first_keycode*/ } XDeviceMappingEvent; /******************************************************************* * * ChangeDeviceNotify event. This event is sent when an * XChangeKeyboard or XChangePointer request is made. * */ typedef struct { int type; unsigned long serial; /* # of last request processed by server */ Bool send_event; /* true if this came from a SendEvent request */ Display *display; /* Display the event was read from */ 84 X Input Extension Library X11, Release 6.4 Window window; /* unused */ XID deviceid; Time time; int request; /* NewPointer or NewKeyboard */ } XChangeDeviceNotifyEvent; /******************************************************************* * * Control structures for input devices that support input class * Feedback. These are used by the XGetFeedbackControl and * XChangeFeedbackControl functions. * */ typedef struct { #if defined(__cplusplus) || defined(c_plusplus) XID c_class; #else XID class; #endif int length; XID id; } XFeedbackState; typedef struct { #if defined(__cplusplus) || defined(c_plusplus) XID c_class; #else XID class; #endif int length; XID id; int click; int percent; int pitch; int duration; int led_mask; int global_auto_repeat; char auto_repeats[32]; } XKbdFeedbackState; typedef struct { #if defined(__cplusplus) || defined(c_plusplus) XID c_class; #else XID class; #endif int length; XID id; int accelNum; int accelDenom; int threshold; } XPtrFeedbackState; 85 X Input Extension Library X11, Release 6.4 typedef struct { #if defined(__cplusplus) || defined(c_plusplus) XID c_class; #else XID class; #endif int length; XID id; int resolution; int minVal; int maxVal; } XIntegerFeedbackState; typedef struct { #if defined(__cplusplus) || defined(c_plusplus) XID c_class; #else XID class; #endif int length; XID id; int max_symbols; int num_syms_supported; KeySym *syms_supported; } XStringFeedbackState; typedef struct { #if defined(__cplusplus) || defined(c_plusplus) XID c_class; #else XID class; #endif int length; XID id; int percent; int pitch; int duration; } XBellFeedbackState; typedef struct { #if defined(__cplusplus) || defined(c_plusplus) XID c_class; #else XID class; #endif int length; XID id; int led_values; int led_mask; } XLedFeedbackState; typedef struct { #if defined(__cplusplus) || defined(c_plusplus) XID c_class; 86 X Input Extension Library X11, Release 6.4 #else XID class; #endif int length; XID id; } XFeedbackControl; typedef struct { #if defined(__cplusplus) || defined(c_plusplus) XID c_class; #else XID class; #endif int length; XID id; int accelNum; int accelDenom; int threshold; } XPtrFeedbackControl; typedef struct { #if defined(__cplusplus) || defined(c_plusplus) XID c_class; #else XID class; #endif int length; XID id; int click; int percent; int pitch; int duration; int led_mask; int led_value; int key; int auto_repeat_mode; } XKbdFeedbackControl; typedef struct { #if defined(__cplusplus) || defined(c_plusplus) XID c_class; #else XID class; #endif int length; XID id; int num_keysyms; KeySym *syms_to_display; } XStringFeedbackControl; typedef struct { #if defined(__cplusplus) || defined(c_plusplus) XID c_class; #else 87 X Input Extension Library X11, Release 6.4 XID class; #endif int length; XID id; int int_to_display; } XIntegerFeedbackControl; typedef struct { #if defined(__cplusplus) || defined(c_plusplus) XID c_class; #else XID class; #endif int length; XID id; int percent; int pitch; int duration; } XBellFeedbackControl; typedef struct { #if defined(__cplusplus) || defined(c_plusplus) XID c_class; #else XID class; #endif int length; XID id; int led_mask; int led_values; } XLedFeedbackControl; /******************************************************************* * * Device control structures. * */ typedef struct { XID control; int length; } XDeviceControl; typedef struct { XID control; int length; int first_valuator; int num_valuators; int *resolutions; } XDeviceResolutionControl; typedef struct { XID control; int length; 88 X Input Extension Library X11, Release 6.4 int num_valuators; int *resolutions; int *min_resolutions; int *max_resolutions; } XDeviceResolutionState; /******************************************************************* * * An array of XDeviceList structures is returned by the * XListInputDevices function. Each entry contains information * about one input device. Among that information is an array of * pointers to structures that describe the characteristics of * the input device. * */ typedef struct _XAnyClassinfo *XAnyClassPtr; typedef struct _XAnyClassinfo { #if defined(__cplusplus) || defined(c_plusplus) XID c_class; #else XID class; #endif int length; } XAnyClassInfo; typedef struct _XDeviceInfo *XDeviceInfoPtr; typedef struct _XDeviceInfo { XID id; Atom type; char *name; int num_classes; int use; XAnyClassPtr inputclassinfo; } XDeviceInfo; typedef struct _XKeyInfo *XKeyInfoPtr; typedef struct _XKeyInfo { #if defined(__cplusplus) || defined(c_plusplus) XID c_class; #else XID class; #endif int length; unsigned short min_keycode; unsigned short max_keycode; unsigned short num_keys; } XKeyInfo; 89 X Input Extension Library X11, Release 6.4 typedef struct _XButtonInfo *XButtonInfoPtr; typedef struct _XButtonInfo { #if defined(__cplusplus) || defined(c_plusplus) XID c_class; #else XID class; #endif int length; short num_buttons; } XButtonInfo; typedef struct _XAxisInfo *XAxisInfoPtr; typedef struct _XAxisInfo { int resolution; int min_value; int max_value; } XAxisInfo; typedef struct _XValuatorInfo *XValuatorInfoPtr; typedef struct _XValuatorInfo { #if defined(__cplusplus) || defined(c_plusplus) XID c_class; #else XID class; #endif int length; unsigned char num_axes; unsigned char mode; unsigned long motion_buffer; XAxisInfoPtr axes; } XValuatorInfo; /******************************************************************* * * An XDevice structure is returned by the XOpenDevice function. * It contains an array of pointers to XInputClassInfo structures. * Each contains information about a class of input supported by the * device, including a pointer to an array of data for each type of event * the device reports. * */ typedef struct { unsigned char input_class; unsigned char event_type_base; } XInputClassInfo; typedef struct { 90 X Input Extension Library X11, Release 6.4 XID device_id; int num_classes; XInputClassInfo *classes; } XDevice; /******************************************************************* * * The following structure is used to return information for the * XGetSelectedExtensionEvents function. * */ typedef struct { XEventClass event_type; XID device; } XEventList; /******************************************************************* * * The following structure is used to return motion history data from * an input device that supports the input class Valuators. * This information is returned by the XGetDeviceMotionEvents function. * */ typedef struct { Time time; int *data; } XDeviceTimeCoord; /******************************************************************* * * Device state structure. * This is returned by the XQueryDeviceState request. * */ typedef struct { XID device_id; int num_classes; XInputClass *data; } XDeviceState; /******************************************************************* * * Note that the mode field is a bitfield that reports the Proximity * status of the device as well as the mode. The mode field should * be OR'd with the mask DeviceMode and compared with the values * Absolute and Relative to determine the mode, and should be OR'd * with the mask ProximityState and compared with the values InProximity * and OutOfProximity to determine the proximity state. * 91 X Input Extension Library X11, Release 6.4 */ typedef struct { #if defined(__cplusplus) || defined(c_plusplus) unsigned char c_class; #else unsigned char class; #endif unsigned char length; unsigned char num_valuators; unsigned char mode; int *valuators; } XValuatorState; typedef struct { #if defined(__cplusplus) || defined(c_plusplus) unsigned char c_class; #else unsigned char class; #endif unsigned char length; short num_keys; char keys[32]; } XKeyState; typedef struct { #if defined(__cplusplus) || defined(c_plusplus) unsigned char c_class; #else unsigned char class; #endif unsigned char length; short num_buttons; char buttons[32]; } XButtonState; /******************************************************************* * * Function definitions. * */ _XFUNCPROTOBEGIN extern int XChangeKeyboardDevice( Display* /* display */, XDevice* /* device */ ); extern int XChangePointerDevice( Display* /* display */, XDevice* /* device */, int /* xaxis */, int /* yaxis */ 92 X Input Extension Library X11, Release 6.4 ); extern int XGrabDevice( Display* /* display */, XDevice* /* device */, Window /* grab_window */, Bool /* ownerEvents */, int /* event count */, XEventClass* /* event_list */, int /* this_device_mode */, int /* other_devices_mode */, Time /* time */ ); extern int XUngrabDevice( Display* /* display */, XDevice* /* device */, Time /* time */ ); extern int XGrabDeviceKey( Display* /* display */, XDevice* /* device */, unsigned int /* key */, unsigned int /* modifiers */, XDevice* /* modifier_device */, Window /* grab_window */, Bool /* owner_events */, unsigned int /* event_count */, XEventClass* /* event_list */, int /* this_device_mode */, int /* other_devices_mode */ ); extern int XUngrabDeviceKey( Display* /* display */, XDevice* /* device */, unsigned int /* key */, unsigned int /* modifiers */, XDevice* /* modifier_dev */, Window /* grab_window */ ); extern int XGrabDeviceButton( Display* /* display */, XDevice* /* device */, unsigned int /* button */, unsigned int /* modifiers */, XDevice* /* modifier_device */, Window /* grab_window */, Bool /* owner_events */, unsigned int /* event_count */, XEventClass* /* event_list */, int /* this_device_mode */, 93 X Input Extension Library X11, Release 6.4 int /* other_devices_mode */ ); extern int XUngrabDeviceButton( Display* /* display */, XDevice* /* device */, unsigned int /* button */, unsigned int /* modifiers */, XDevice* /* modifier_dev */, Window /* grab_window */ ); extern int XAllowDeviceEvents( Display* /* display */, XDevice* /* device */, int /* event_mode */, Time /* time */ ); extern int XGetDeviceFocus( Display* /* display */, XDevice* /* device */, Window* /* focus */, int* /* revert_to */, Time* /* time */ ); extern int XSetDeviceFocus( Display* /* display */, XDevice* /* device */, Window /* focus */, int /* revert_to */, Time /* time */ ); extern XFeedbackState *XGetFeedbackControl( Display* /* display */, XDevice* /* device */, int* /* num_feedbacks */ ); extern void XFreeFeedbackList( XFeedbackState* /* list */ ); extern int XChangeFeedbackControl( Display* /* display */, XDevice* /* device */, unsigned long /* mask */, XFeedbackControl* /* f */ ); extern int XDeviceBell( Display* /* display */, 94 X Input Extension Library X11, Release 6.4 XDevice* /* device */, XID /* feedbackclass */, XID /* feedbackid */, int /* percent */ ); extern KeySym *XGetDeviceKeyMapping( Display* /* display */, XDevice* /* device */, #if NeedWidePrototypes unsigned int /* first */, #else KeyCode /* first */, #endif int /* keycount */, int* /* syms_per_code */ ); extern int XChangeDeviceKeyMapping( Display* /* display */, XDevice* /* device */, int /* first */, int /* syms_per_code */, KeySym* /* keysyms */, int /* count */ ); extern XModifierKeymap *XGetDeviceModifierMapping( Display* /* display */, XDevice* /* device */ ); extern int XSetDeviceModifierMapping( Display* /* display */, XDevice* /* device */, XModifierKeymap* /* modmap */ ); extern int XSetDeviceButtonMapping( Display* /* display */, XDevice* /* device */, unsigned char* /* map[] */, int /* nmap */ ); extern int XGetDeviceButtonMapping( Display* /* display */, XDevice* /* device */, unsigned char* /* map[] */, unsigned int /* nmap */ ); extern XDeviceState *XQueryDeviceState( Display* /* display */, 95 X Input Extension Library X11, Release 6.4 XDevice* /* device */ ); extern void XFreeDeviceState( XDeviceState* /* list */ ); extern XExtensionVersion *XGetExtensionVersion( Display* /* display */, _Xconst char* /* name */ ); extern XDeviceInfo *XListInputDevices( Display* /* display */, int* /* ndevices */ ); extern void XFreeDeviceList( XDeviceInfo* /* list */ ); extern XDevice *XOpenDevice( Display* /* display */, XID /* id */ ); extern int XCloseDevice( Display* /* display */, XDevice* /* device */ ); extern int XSetDeviceMode( Display* /* display */, XDevice* /* device */, int /* mode */ ); extern int XSetDeviceValuators( Display* /* display */, XDevice* /* device */, int* /* valuators */, int /* first_valuator */, int /* num_valuators */ ); extern XDeviceControl *XGetDeviceControl( Display* /* display */, XDevice* /* device */, int /* control */ ); extern int XChangeDeviceControl( Display* /* display */, XDevice* /* device */, 96 X Input Extension Library X11, Release 6.4 int /* control */, XDeviceControl* /* d */ ); extern int XSelectExtensionEvent( Display* /* display */, Window /* w */, XEventClass* /* event_list */, int /* count */ ); extern int XGetSelectedExtensionEvents( Display* /* display */, Window /* w */, int* /* this_client_count */, XEventClass** /* this_client_list */, int* /* all_clients_count */, XEventClass** /* all_clients_list */ ); extern int XChangeDeviceDontPropagateList( Display* /* display */, Window /* window */, int /* count */, XEventClass* /* events */, int /* mode */ ); extern XEventClass *XGetDeviceDontPropagateList( Display* /* display */, Window /* window */, int* /* count */ ); extern Status XSendExtensionEvent( Display* /* display */, XDevice* /* device */, Window /* dest */, Bool /* prop */, int /* count */, XEventClass* /* list */, XEvent* /* event */ ); extern XDeviceTimeCoord *XGetDeviceMotionEvents( Display* /* display */, XDevice* /* device */, Time /* start */, Time /* stop */, int* /* nEvents */, int* /* mode */, int* /* axis_count */ ); 97 X Input Extension Library X11, Release 6.4 extern void XFreeDeviceMotionEvents( XDeviceTimeCoord* /* events */ ); extern void XFreeDeviceControl( XDeviceControl* /* control */ ); extern void _xibaddevice(Display *dpy, int *error); extern void _xibadclass(Display *dpy, int *error); extern void _xibadevent(Display *dpy, int *error); extern void _xibadmode(Display *dpy, int *error); extern void _xidevicebusy(Display *dpy, int *error); _XFUNCPROTOEND #endif /* _XINPUT_H_ */ /************************************************************ Copyright 1989, 1998 The Open Group Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation. The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of The Open Group shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization from The Open Group. Copyright 1989 by Hewlett-Packard Company, Palo Alto, California. All Rights Reserved Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of Hewlett-Packard not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. 98 X Input Extension Library X11, Release 6.4 HEWLETT-PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL HEWLETT-PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ********************************************************/ /* $XFree86: xc/doc/specs/Xi/library.ms,v 1.3 2006/01/09 14:56:34 dawes Exp $ */ /* Definitions used by the server, library and client */ #ifndef _XI_H_ #define _XI_H_ #define sz_xGetExtensionVersionReq 8 #define sz_xGetExtensionVersionReply 32 #define sz_xListInputDevicesReq 4 #define sz_xListInputDevicesReply 32 #define sz_xOpenDeviceReq 8 #define sz_xOpenDeviceReply 32 #define sz_xCloseDeviceReq 8 #define sz_xSetDeviceModeReq 8 #define sz_xSetDeviceModeReply 32 #define sz_xSelectExtensionEventReq 12 #define sz_xGetSelectedExtensionEventsReq 8 #define sz_xGetSelectedExtensionEventsReply 32 #define sz_xChangeDeviceDontPropagateListReq 12 #define sz_xGetDeviceDontPropagateListReq 8 #define sz_xGetDeviceDontPropagateListReply 32 #define sz_xGetDeviceMotionEventsReq 16 #define sz_xGetDeviceMotionEventsReply 32 #define sz_xChangeKeyboardDeviceReq 8 #define sz_xChangeKeyboardDeviceReply 32 #define sz_xChangePointerDeviceReq 8 #define sz_xChangePointerDeviceReply 32 #define sz_xGrabDeviceReq 20 #define sz_xGrabDeviceReply 32 #define sz_xUngrabDeviceReq 12 #define sz_xGrabDeviceKeyReq 20 #define sz_xGrabDeviceKeyReply 32 #define sz_xUngrabDeviceKeyReq 16 #define sz_xGrabDeviceButtonReq 20 #define sz_xGrabDeviceButtonReply 32 #define sz_xUngrabDeviceButtonReq 16 #define sz_xAllowDeviceEventsReq 12 #define sz_xGetDeviceFocusReq 8 #define sz_xGetDeviceFocusReply 32 #define sz_xSetDeviceFocusReq 16 #define sz_xGetFeedbackControlReq 8 #define sz_xGetFeedbackControlReply 32 #define sz_xChangeFeedbackControlReq 12 99 X Input Extension Library X11, Release 6.4 #define sz_xGetDeviceKeyMappingReq 8 #define sz_xGetDeviceKeyMappingReply 32 #define sz_xChangeDeviceKeyMappingReq 8 #define sz_xGetDeviceModifierMappingReq 8 #define sz_xSetDeviceModifierMappingReq 8 #define sz_xSetDeviceModifierMappingReply 32 #define sz_xGetDeviceButtonMappingReq 8 #define sz_xGetDeviceButtonMappingReply 32 #define sz_xSetDeviceButtonMappingReq 8 #define sz_xSetDeviceButtonMappingReply 32 #define sz_xQueryDeviceStateReq 8 #define sz_xQueryDeviceStateReply 32 #define sz_xSendExtensionEventReq 16 #define sz_xDeviceBellReq 8 #define sz_xSetDeviceValuatorsReq 8 #define sz_xSetDeviceValuatorsReply 32 #define sz_xGetDeviceControlReq 8 #define sz_xGetDeviceControlReply 32 #define sz_xChangeDeviceControlReq 8 #define sz_xChangeDeviceControlReply 32 #define INAME "XInputExtension" #define XI_KEYBOARD "KEYBOARD" #define XI_MOUSE "MOUSE" #define XI_TABLET "TABLET" #define XI_TOUCHSCREEN "TOUCHSCREEN" #define XI_TOUCHPAD "TOUCHPAD" #define XI_BARCODE "BARCODE" #define XI_BUTTONBOX "BUTTONBOX" #define XI_KNOB_BOX "KNOB_BOX" #define XI_ONE_KNOB "ONE_KNOB" #define XI_NINE_KNOB "NINE_KNOB" #define XI_TRACKBALL "TRACKBALL" #define XI_QUADRATURE "QUADRATURE" #define XI_ID_MODULE "ID_MODULE" #define XI_SPACEBALL "SPACEBALL" #define XI_DATAGLOVE "DATAGLOVE" #define XI_EYETRACKER "EYETRACKER" #define XI_CURSORKEYS "CURSORKEYS" #define XI_FOOTMOUSE "FOOTMOUSE" #define Dont_Check 0 #define XInput_Initial_Release 1 #define XInput_Add_XDeviceBell 2 #define XInput_Add_XSetDeviceValuators 3 #define XInput_Add_XChangeDeviceControl 4 #define XI_Absent 0 #define XI_Present 1 #define XI_Initial_Release_Major 1 #define XI_Initial_Release_Minor 0 100 X Input Extension Library X11, Release 6.4 #define XI_Add_XDeviceBell_Major 1 #define XI_Add_XDeviceBell_Minor 1 #define XI_Add_XSetDeviceValuators_Major 1 #define XI_Add_XSetDeviceValuators_Minor 2 #define XI_Add_XChangeDeviceControl_Major 1 #define XI_Add_XChangeDeviceControl_Minor 3 #define DEVICE_RESOLUTION 1 #define NoSuchExtension 1 #define COUNT 0 #define CREATE 1 #define NewPointer 0 #define NewKeyboard 1 #define XPOINTER 0 #define XKEYBOARD 1 #define UseXKeyboard 0xFF #define IsXPointer 0 #define IsXKeyboard 1 #define IsXExtensionDevice 2 #define AsyncThisDevice 0 #define SyncThisDevice 1 #define ReplayThisDevice 2 #define AsyncOtherDevices 3 #define AsyncAll 4 #define SyncAll 5 #define FollowKeyboard 3 #ifndef RevertToFollowKeyboard #define RevertToFollowKeyboard 3 #endif #define DvAccelNum (1L << 0) #define DvAccelDenom (1L << 1) #define DvThreshold (1L << 2) #define DvKeyClickPercent (1L<<0) #define DvPercent (1L<<1) #define DvPitch (1L<<2) #define DvDuration (1L<<3) #define DvLed (1L<<4) #define DvLedMode (1L<<5) #define DvKey (1L<<6) #define DvAutoRepeatMode (1L<<7) #define DvString (1L << 0) 101 X Input Extension Library X11, Release 6.4 #define DvInteger (1L << 0) #define DeviceMode (1L << 0) #define Relative 0 #define Absolute 1 /* Merged from Metrolink tree for XINPUT stuff */ #define TS_Raw 57 #define TS_Scaled 58 #define SendCoreEvents 59 #define DontSendCoreEvents 60 /* End of merged section */ #define ProximityState (1L << 1) #define InProximity (0L << 1) #define OutOfProximity (1L << 1) #define AddToList 0 #define DeleteFromList 1 #define KeyClass 0 #define ButtonClass 1 #define ValuatorClass 2 #define FeedbackClass 3 #define ProximityClass 4 #define FocusClass 5 #define OtherClass 6 #define KbdFeedbackClass 0 #define PtrFeedbackClass 1 #define StringFeedbackClass 2 #define IntegerFeedbackClass 3 #define LedFeedbackClass 4 #define BellFeedbackClass 5 #define _devicePointerMotionHint 0 #define _deviceButton1Motion 1 #define _deviceButton2Motion 2 #define _deviceButton3Motion 3 #define _deviceButton4Motion 4 #define _deviceButton5Motion 5 #define _deviceButtonMotion 6 #define _deviceButtonGrab 7 #define _deviceOwnerGrabButton 8 #define _noExtensionEvent 9 #define XI_BadDevice 0 #define XI_BadEvent 1 #define XI_BadMode 2 #define XI_DeviceBusy 3 #define XI_BadClass 4 /* Make XEventClass be a CARD32 for 64 bit servers. Don't affect client * definition of XEventClass since that would be a library interface change. * See the top of X.h for more _XSERVER64 magic. 102 X Input Extension Library X11, Release 6.4 */ #ifdef _XSERVER64 typedef CARD32 XEventClass; #else typedef unsigned long XEventClass; #endif /******************************************************************* * * Extension version structure. * */ typedef struct { int present; short major_version; short minor_version; } XExtensionVersion; #endif /* _XI_H_ */ 103 X Input Extension Library X11, Release 6.4 104 Table of Contents 1. Input Extension Overview . . . . . . . . . . . . . . 1 1.1. Design Approach . . . . . . . . . . . . . . . . . . 1 1.2. Core Input Devices . . . . . . . . . . . . . . . . 1 1.3. Extension Input Devices . . . . . . . . . . . . . . 2 1.3.1. Input Device Classes . . . . . . . . . . . . . . 3 1.4. Using Extension Input Devices . . . . . . . . . . . 3 2. Library Extension Requests . . . . . . . . . . . . . 4 2.1. Window Manager Functions . . . . . . . . . . . . . 4 2.1.1. Changing the Core Devices . . . . . . . . . . . . 5 2.1.2. Event Synchronization and Core Grabs . . . . . . 7 2.1.3. Extension Active Grabs . . . . . . . . . . . . . 8 2.1.4. Passively Grabbing a Key . . . . . . . . . . . . 11 2.1.5. Passively Grabbing a Button . . . . . . . . . . . 16 2.1.6. Thawing a Device . . . . . . . . . . . . . . . . 21 2.1.7. Controlling Device Focus . . . . . . . . . . . . 23 2.1.8. Controlling Device Feedback . . . . . . . . . . . 26 2.1.9. Ringing a Bell on an Input Device . . . . . . . . 37 2.1.10. Controlling Device Encoding . . . . . . . . . . 38 2.1.11. Controlling Button Mapping . . . . . . . . . . . 41 2.1.12. Obtaining the State of a Device . . . . . . . . 43 2.2. Events . . . . . . . . . . . . . . . . . . . . . . 46 2.2.1. Event Types . . . . . . . . . . . . . . . . . . . 46 2.2.2. Event Classes . . . . . . . . . . . . . . . . . . 47 2.2.3. Event Structures . . . . . . . . . . . . . . . . 48 2.2.3.1. Device Key Events . . . . . . . . . . . . . . . 48 2.2.3.2. Device Button Events . . . . . . . . . . . . . 49 2.2.3.3. Device Motion Events . . . . . . . . . . . . . 50 2.2.3.4. Device Focus Events . . . . . . . . . . . . . . 51 2.2.3.5. Device StateNotify Event . . . . . . . . . . . 52 2.2.3.6. Device Mapping Event . . . . . . . . . . . . . 53 2.2.3.7. ChangeDeviceNotify Event . . . . . . . . . . . 54 2.2.3.8. Proximity Events . . . . . . . . . . . . . . . 54 2.3. Event Handling Functions . . . . . . . . . . . . . 55 2.3.1. Determining the Extension Version . . . . . . . . 56 2.3.2. Listing Available Devices . . . . . . . . . . . . 56 2.3.3. Enabling and Disabling Extension Devices . . . . 59 2.3.4. Changing the Mode of a Device . . . . . . . . . . 61 2.3.5. Initializing Valuators on an Input Device . . . . 62 2.3.6. Getting Input Device Controls . . . . . . . . . . 63 2.3.7. Changing Input Device Controls . . . . . . . . . 65 2.3.8. Selecting Extension Device Events . . . . . . . . 67 2.3.9. Determining Selected Device Events . . . . . . . 69 2.3.10. Controlling Event Propagation . . . . . . . . . 70 2.3.11. Sending an Event . . . . . . . . . . . . . . . . 72 2.3.12. Getting Motion History . . . . . . . . . . . . . 74 2.3.12. Appendix A . . . . . . . . . . . . . . . . . . . 77 i