.\"##
.\" $XConsortium: p342,v 5.2 94/04/17 20:58:25 rws Exp $
.\"##
.\"## 
$XMCOPY
.\"## Copyright (c) 1990, 1991 by Sun Microsystems, Inc. 
.\"## 
.\"##                         All Rights Reserved
.\"## 
.\"## Permission to use, copy, modify, and distribute this software and its 
.\"## documentation for any purpose and without fee is hereby granted, 
.\"## provided that the above copyright notice appear in all copies and that
.\"## both that copyright notice and this permission notice appear in 
.\"## supporting documentation, and that the name of Sun Microsystems,
.\"## not be used in advertising or publicity 
.\"## pertaining to distribution of the software without specific, written 
.\"## prior permission.  
.\"## 
.\"## SUN MICROSYSTEMS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, 
.\"## INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
.\"## EVENT SHALL SUN MICROSYSTEMS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
.\"## CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
.\"## USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
.\"## OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
.\"## PERFORMANCE OF THIS SOFTWARE.
.TH "SET LOCATOR MODE" 3P "29 February 1991"
.SH NAME
SET LOCATOR MODE \- set locator device operating mode and echoing state
.IX "Input Modes" "SET LOCATOR MODE"
.IX "Locator Input Devices" "SET LOCATOR MODE"
.SH SYNOPSIS
.SS C Syntax
.ft B
.ta 1.25i 3i
.nf
void
pset_loc_mode ( ws, dev, mode, echo )
Pint	ws;		\fIworkstation identifier\fP
Pint	dev;	\fIlocator device number\fP
Pop_mode	mode;	\fIoperating mode\fP
Pecho_switch	echo;	\fIecho switch\fP
.fi
.ft R
.SS Required PHIGS Operating States
(PHOP, WSOP, *, *)
.SH DESCRIPTION
.SS Purpose
\s-2SET LOCATOR MODE\s+2 sets the operating mode and echo switch for a
specified locator device on a specified workstation.
.SS C Input Parameters
.IP \fIws\fP
The workstation identifier of the workstation associated with the device.
.IP \fIdev\fP
The device number of the locator device to be set.  
See the \fIAvailable Devices\fP section in \s-2INITIALIZE LOCATOR 3\s+2
for a description of the available devices.
.IP \fImode\fP
Specifies the operating mode for the specified locator device.
Pop_mode is an enumeration defined in phigs.h as follows:
.nf
.sp .4
.ta .5i
typedef enum {
.sp .2
	POP_REQ,
	POP_SAMPLE,
	POP_EVENT
.sp .2
} Pop_mode;
.fi
.IP \fIecho\fP
The echo switch value for the specified locator device.
Pecho_switch is an enumeration defined in phigs.h as follows:  
.nf
.sp .4
.ta .5i
typedef enum {
.sp .2
	PSWITCH_NO_ECHO,
	PSWITCH_ECHO
.sp .2
} Pecho_switch;
.fi
.SS Execution
.LP
\s-2SET LOCATOR MODE\s+2 sets the operating mode and echo flag of the specified
device.
The default operating mode is \s-2POP_REQ\s+2.
The default echo switch is \s-2PSWITCH_ECHO\s+2.
.LP
The operating mode controls how the input from the device is obtained:
.sp .5v
.in +0.5i
.ta +0.2i
.ti -0.2i
\(bu	If the operating mode is \s-2REQUEST\s+2,
\s-2REQUEST LOCATOR {3}\s+2 may be used to prompt for and receive input from
a locator input device.
\s-2REQUEST LOCATOR {3}\s+2 will not return until the operator enters input to
the device.
.sp .5v
.ti -0.2i
\(bu	If the operating mode is \s-2SAMPLE\s+2,
\s-2SAMPLE LOCATOR {3}\s+2 may be used to 
return the current input value of the device without waiting for operator
input.
.sp .5v
.ti -0.2i
\(bu	If the operating mode is \s-2EVENT\s+2,
the input values generated by the operator are added to the \s-2PHIGS\s+2
input event queue.
The functions \s-2AWAIT EVENT\s+2 and \s-2GET LOCATOR {3}\s+2 may then be used
to retrieve these events from the input queue.
.DT
.sp
.LP
The echo switch may be used by some devices to control whether or not values
selected by the operator are echoed to the device.
.SH ERRORS
.IP 003
Ignoring function, function requires state 
(\s-2PHOP\s+2, \s-2WSOP\s+2, \s-2*\s+2, \s-2*\s+2)
.IP 054
Ignoring function, the specified workstation is not open
.IP 061
Ignoring function, specified workstation is neither of category \s-2INPUT\s+2
nor of category \s-2OUTIN\s+2
.IP 250
Ignoring function, the specified device is not available
on the specified workstation
.SH SEE ALSO
.nf
.IP
.ta 0.5i
.SM "REQUEST LOCATOR 3 (3P)"
.SM "SAMPLE LOCATOR 3 (3P)"
.SM "GET LOCATOR 3 (3P)"
.SM "INQUIRE LOCATOR DEVICE STATE 3 (3P)"
.SM "INITIALIZE LOCATOR 3 (3P)"
.fi