.\"##
.\" $XConsortium: p370,v 5.2 94/04/17 20:58:45 rws Exp $
.\"##
.\"## 
$XMCOPY
.\"## Copyright (c) 1990, 1991 by Sun Microsystems, Inc. 
.\"## 
.\"##                         All Rights Reserved
.\"## 
.\"## Permission to use, copy, modify, and distribute this software and its 
.\"## documentation for any purpose and without fee is hereby granted, 
.\"## provided that the above copyright notice appear in all copies and that
.\"## both that copyright notice and this permission notice appear in 
.\"## supporting documentation, and that the name of Sun Microsystems,
.\"## not be used in advertising or publicity 
.\"## pertaining to distribution of the software without specific, written 
.\"## prior permission.  
.\"## 
.\"## SUN MICROSYSTEMS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, 
.\"## INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
.\"## EVENT SHALL SUN MICROSYSTEMS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
.\"## CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
.\"## USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
.\"## OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
.\"## PERFORMANCE OF THIS SOFTWARE.
.ds f \s-2SET REFLECTANCE PROPERTIES\s+2
.TH "SET REFLECTANCE PROPERTIES" 3P+ "29 February 1991"
.SH NAME
SET REFLECTANCE PROPERTIES \- create a structure element to set surface
area properties 
.IX "Filled Area Interior Attributes" "SET REFLECTANCE PROPERTIES"
.IX "Aspect Source Flags" "SET REFLECTANCE PROPERTIES"
.IX "Attributes, Filled Area Interior Attributes" "SET REFLECTANCE PROPERTIES"
.IX "PHIGS Extension Functions" "SET REFLECTANCE PROPERTIES"
.SH SYNOPSIS
.SS C Syntax
.ft B
.ta 1.25i 3i
.nf
void
pset_refl_props ( properties )
Prefl_props	*properties;	\fIsurface area properties\fP
.fi
.ft R
.SS Required PHIGS Operating States
(PHOP, *, STOP, *)
.SH DESCRIPTION
.SS Purpose
\s-2SET REFLECTANCE PROPERTIES\s+2 creates a structure element to set surface
area properties. When the current area properties Aspect Source Flag
(\s-2ASF\s+2) is set to
\s-2INDIVIDUAL\s+2, the current value of
this attribute applies to the following output primitives:
.RS
.LP
\(bu
.SM "FILL AREA"
.LP
\(bu
.SM "FILL AREA 3"
.LP 
\(bu
.SM "FILL AREA SET"
.LP
\(bu
.SM "FILL AREA SET 3"
.LP
\(bu
.SM "FILL AREA SET 3 WITH DATA"
.LP
\(bu
.SM "SET OF FILL AREA SET 3 WITH DATA"
.LP
\(bu
.SM "QUADRILATERAL MESH 3 WITH DATA"
.LP
\(bu
.SM "TRIANGLE STRIP 3 WITH DATA"
.LP
\(bu
.SM "NON-UNIFORM B-SPLINE SURFACE"
.RE
.SS C Input Parameters
.IP \fIproperties\fR
A pointer to a Prefl_props structure that specifies the area properties.
Prefl_props is defined in phigs.h as follows:
.sp .2
.nf
.ta .5i +\w'Pfloat     'u +\w'specular_colr;     'u
.sp .2
typedef struct {
.sp .2
	Pfloat	ambient_coef;	/* ambient reflectance coefficient */
	Pfloat	diffuse_coef;	/* diffuse reflectance coefficient */
	Pfloat	specular_coef;	/* specular reflectance coefficient */
	Pgcolr	specular_colr;	/* specular colour */
	Pfloat	specular_exp;	/* specular exponent */
	Pfloat	transpar_coef;	/* transparency coefficient */
.sp .2
} Prefl_props;
.IP
.fi
Pgcolr is defined as:
.ta .5i +\w'union  'u +\w'struct  'u +\w'Pfloat      'u +\w'type;    'u +w\'x;      'u
.nf
.sp .4
typedef struct {
.sp .2
	Pint		 type;		/* indirect, RGB, CIE, HSV, HLS */
	union {
	   Pint		ind;		/* colour table index */
	   struct {
		Pfloat		x;		/* red, hue, etc. */
		Pfloat		y;		/* green, saturation, lightness, etc. */
		Pfloat		z;		/* blue, value, saturation, etc. */
	   } general;
	} val;
} Pgcolr;
.fi
.IP
The color type is one of the following:
.sp .2
.ta .5i +1i
.nf
	0	PINDIRECT
	1	PMODEL_RGB
	2	PMODEL_CIELUV
	3	PMODEL_HSV
	4	PMODEL_HLS
.fi
.SS Execution
Depending upon the edit mode, a \s-2SET REFLECTANCE PROPERTIES\s+2
element is inserted into the open structure after the element pointer
or replaces the element pointed at by the element pointer. The element
pointer is then updated to point to this \s-2SET REFLECTANCE PROPERTIES\s+2
element.
.LP
When the structure is traversed, the current area properties
entry in the traversal state list is set to the
specified value. This value is used with subsequent 
filled area output primitives
when the current area properties \s-2ASF\s+2 entry
in the traversal state list is \s-2INDIVIDUAL\s+2.
During traversal, if the specified area properties are not available
on a workstation, method one (\fINone\fP) will be used on that workstation.
.LP
When the current area properties \s-2ASF\s+2 is set to \s-2BUNDLED\s+2,
the area properties are taken from the
workstation extended representation indicated by the current interior index.
In this case, the area properties
set with \s-2SET REFLECTANCE PROPERTIES\s+2 have no effect.
.LP
The area properties supported by a workstation type can be determined
with the function \s-2INQUIRE INTERIOR FACILITIES PLUS\s+2.
.sp .2
.SH ERRORS
.IP 005
Ignoring function, function requires state (\s-2PHOP,*,STOP,*\s+2)
.SH SEE ALSO
.nf
.IP
.ta 0.5i
.SM "INTRO PHIGS PLUS (3P+)"
.SM "FILL AREA (3P)"
.SM "FILL AREA SET (3P)"
.SM "FILL AREA 3 (3P)"
.SM "FILL AREA SET 3 (3P)"
.SM "FILL AREA SET 3 WITH DATA (3P+)"
.SM "SET OF FILL AREA SET 3 WITH DATA (3P+)"
.SM "SET INDIVIDUAL ASF (3P)"
.SM "SET INTERIOR REPRESENTATION (3P)"
.SM "SET INTERIOR REPRESENTATION PLUS (3P+)"
.SM "INQUIRE INTERIOR FACILITIES PLUS (3P+)"
.SM "NON-UNIFORM B-SPLINE SURFACE (3P+)"
.SM "QUADRILATERAL MESH 3 WITH DATA (3P+)"
.SM "TRIANGLE STRIP 3 WTIH DATA (3P+)"
.fi